[Jimbobeast]

My 70 GTO has the original 4-speed with the speedo exiting on the passenger side. I don't know if the tail section was swapped/broken during its previous lives. There is no way to route the cable under the trans, attach it to the trans-to-bell housing lower bolts and then come back to the attachment on the body brace and then upwards. If I route it over the trans, it just sits there among the shift linkage, which can't be good. Any thoughts besides remove the trans and get the correct tail housing?

[Scarebird]

IIRC you don't use the driver's clip if routing to the passenger side.