[4 SPEED GOAT]

HI I AM LOOKING FOR A SET OF 1970 ONLY FIREBIRD HOOD HINGES. THANKS

[3tas4me]

I have a set.

[MMunger]

I have a pretty original '70TA. Out of curiosity how to I confirm mine are '70 hinges?
I know I have a later hood and am in the market for a correct one, but if the my hinges are wrong I'll be in the market for those too.

Thanks,
Mike

[Tellyshavilli]

Originally Posted by MMunger

I have a pretty original '70TA. Out of curiosity how to I confirm mine are '70 hinges?
I know I have a later hood and am in the market for a correct one, but if the my hinges are wrong I'll be in the market for those too.

Thanks,
Mike

Post a picture of the front and back

[MMunger]

Tellyshavilli

Here are the outside and inside of both the drivers and the passenger sides

[Ramairnacho]

Originally Posted by MMunger

Tellyshavilli

Here are the outside and inside of both the drivers and the passenger sides

It's hard to.say for me but take a closer pic of the inside hinges the 70 are one year only
Notice the square end on lower inside arm. My car formula i.got xxxxx stamp on passenger side and blank on drivers side

[R 70 Judge]

1970 hood hinges have one-year welded support tab & light blue metallic paint stripe/light blue smear

Commonly the left hinge is stamped 525 and right is stamped 524.

Some didn't have the 524/525 stamping. Some had XXXXXXX stamping instead. There's no rhyme or reason for the variations that anyone can figure out.

Hood Hinge Springs: 69-70 P/N 546325 29 coils, 1 7/16 (1.34" - 1.43") outside diameter, 1/4 inch rod size, and measure 9 1/2 inches

Springs 71-80 3907626 24 coils 1 5/8 (1.625)

[MMunger]

Thanks James, very helpful to help understand the difference.
These are pics of mine from the angle to show what you described. Looks like mine are not correct to my car. Looks like I may be on the hunt for both a hood and the hinges.

[FASTASSBIRD]

I got a set for you