[brucee70]

Hi,

I'm looking for the Rear End Stainless Trim that goes over the drivers side (left) rear tail light on my 67 Bonneville SW. Picture is attached. Always interested in other 67 Bonneville SW parts as well. Thanks!

Bruce

[57Chieftain]

PM a closeup shot of the good side to me with some measurements, Bruce. I have an unbelievable stash of 60s Pontiac big car trim. It looks like you might need a rear bumper too? I've bought 2 of them from eBay seller markuspatterson. You might want to send him a message.

[brucee70]

Originally Posted by 57Chieftain

PM a closeup shot of the good side to me with some measurements, Bruce. I have an unbelievable stash of 60s Pontiac big car trim. It looks like you might need a rear bumper too? I've bought 2 of them from eBay seller markuspatterson. You might want to send him a message.

Thanks John,

I'll take some pics and measurements when I get home -I'm out of town. I have the bad piece ...has a nice ding in it ....was hoping to find another before I pay someone to fix mine.

I'll probably have the bumper redone ...they can do amazing things with a bent one.

Bruce

[blubomber]

Bruce,

if Catalinas are the same there is one in a junk yard up here near F'burg. Doug S. from your club knows where it is. Brad

[brucee70]

Originally Posted by blubomber

Bruce,

if Catalinas are the same there is one in a junk yard up here near F'burg. Doug S. from your club knows where it is. Brad

Thanks Brad ...A Catalina SW does not have the extra trim on the tailgate/tail lights.

Bruce

[jdh421]

bruce, I have a NOS 67 Bonneville tailgate emblem if you are interested. email me at jdh421@msn.com for a picture. thanks, Jeff.

[brucee70]

Originally Posted by jdh421

bruce, I have a NOS 67 Bonneville tailgate emblem if you are interested. email me at jdh421@msn.com for a picture. thanks, Jeff.

Email sent ...Thx

[brucee70]

Originally Posted by 57Chieftain

PM a closeup shot of the good side to me with some measurements, Bruce. I have an unbelievable stash of 60s Pontiac big car trim. It looks like you might need a rear bumper too? I've bought 2 of them from eBay seller markuspatterson. You might want to send him a message.

John ....here are some pics of the rear and other trim pieces ...

Is there a way to attach a file to a PM? I didn't see it ....

[brucee70]

Originally Posted by 57Chieftain

PM a closeup shot of the good side to me with some measurements, Bruce. I have an unbelievable stash of 60s Pontiac big car trim. It looks like you might need a rear bumper too? I've bought 2 of them from eBay seller markuspatterson. You might want to send him a message.

Forgot measurements ...I'll have to do that next week. Heading out of town this afternoon ...need to pack :-) Bruce

[57Chieftain]

Ok, Bruce. I'm not sure of a way to add pics to PMS either. I hope to get some shop time one day this week and I'll take a look. Let me know if you get the measurements.

[brucee70]

Originally Posted by 57Chieftain

Ok, Bruce. I'm not sure of a way to add pics to PMS either. I hope to get some shop time one day this week and I'll take a look. Let me know if you get the measurements.

Hi John


Attached is a close up of the trim I'm looking for ...with rulers. Let me know if that is good enough for you to hunt your stash.
I'll go out and measure other pieces on the car today. Thanks for taking the time to look thru your stuff ..!

Bruce

[57Chieftain]

Will do, Bruce

[brucee70]

Originally Posted by jdh421

bruce, I have a NOS 67 Bonneville tailgate emblem if you are interested. email me at jdh421@msn.com for a picture. thanks, Jeff.

Jeff ...I'm a little slow. Meant to get back to you ...but :-)

I'm sending you an email now. When you get a chance I'd like to see pictures of the emblem you have.

Thanks, Bruce