 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
10-18-2022, 10:31 PM
|
||||
|
||||
AP Block Sonny Bryant crank Oliver Rods
Gently used AP aftermarket block. It is currently 4.25 bore and was told it will clean up at 4.255. It’s dry decked , has 9/16 head bolt threads, 937 bushed lifter bores, 55 mm cam tunnel, o-ring grooves, auxiliary oil port. The block is used and needs to be freshened home, cam bearings, align hone etc.
the crankshaft has 4.25 stroke, 3” mains and is double keyed. Fully counterweighted Bryant billet. It has never been hurt. It has dyno time and a hand full of passes down a track . It has been cleaned , mag’d and checked . Oliver connecting rods they are 6.700 long BBC wrist pin and BBC big end. They have never been hurt they also have dyno time and a handful of passes on them. They have been cleaned mag’d and checked. I bought this from Paul K but I am heading in a different direction $6500 plus the ride.     Sent from my iPhone using Tapatalk |
|
#4
10-20-2022, 09:24 PM
|
||||
|
||||
|
Sale pending
Sent from my iPhone using Tapatalk |
|
#5
10-28-2022, 07:53 PM
|
||||
|
||||
|
Sold
Sent from my iPhone using Tapatalk |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
