WELCOME!
   

Go Back   PY Online Forums - Bringing the Pontiac Hobby Together > PY Welcomes 1993-02 Firebird/Trans Am Owners > 93-02 Wheels/Tires

93-02 Wheels/Tires What setup is on your Bird?

Reply
 
Thread Tools Display Modes
  #1  
Old 05-23-2007, 07:56 PM
Captainofiron's Avatar
Captainofiron Captainofiron is offline
Chief Ponti-yacker
 
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
Default So I finally polished my WS6 wheels

Well my rims started to look really crappy, so I decided to remove the factory clear coat and polish them up.

So I bought some auto stripper and went to town. After the clear was off I buffed them with a buffing wheel and some premium polishing paste to get the stains off, then I went to the wheel with a powerball and mothers aluminum polish. now they look great here are some pics

Before:



With the clear coat removed




After buffing and polish

__________________
www.fquick.com/Captainofiron

68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
Reply With Quote
  #2  
Old 05-24-2007, 06:40 PM
WarbirdTA's Avatar
WarbirdTA WarbirdTA is offline
Senior Chief
 
Join Date: Nov 2004
Location: Kingman, AZ.
Posts: 448
Default

Nice!

George
Reply With Quote
  #3  
Old 05-24-2007, 10:09 PM
Captainofiron's Avatar
Captainofiron Captainofiron is offline
Chief Ponti-yacker
 
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
Default

thanks, beats paying a company 150 each rim to repolish them.
__________________
www.fquick.com/Captainofiron

68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
Reply With Quote
  #4  
Old 05-26-2007, 08:18 PM
David Holmberg's Avatar
David Holmberg David Holmberg is offline
Moderator
 
Join Date: Dec 1999
Location: Port Charlotte, Florida
Posts: 8,688
Send a message via AIM to David Holmberg
Default

Looks very good!
Reply With Quote
  #5  
Old 05-28-2007, 03:21 PM
salem1912 salem1912 is offline
Ultimate Warrior
 
Join Date: Jun 2005
Location: S.E. Pa.
Posts: 1,897
Default

Nice job look new again, I think they put clear coat on just to last a few years so they look like hell and you buy a new car.IMO
Reply With Quote
  #6  
Old 05-28-2007, 05:26 PM
Captainofiron's Avatar
Captainofiron Captainofiron is offline
Chief Ponti-yacker
 
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
Default

you are probably right,

I think in their minds the clear coat will make the polished finish last longer, but, they should have left it bare aluminum IMO
__________________
www.fquick.com/Captainofiron

68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
Reply With Quote
  #7  
Old 11-14-2007, 10:35 AM
lawbreaker2's Avatar
lawbreaker2 lawbreaker2 is offline
Senior Chief
 
Join Date: Feb 2004
Location: OH
Posts: 281
Default

What is the best way to remove the clear coat of them.
Reply With Quote
  #8  
Old 11-24-2007, 01:29 PM
WarbirdTA's Avatar
WarbirdTA WarbirdTA is offline
Senior Chief
 
Join Date: Nov 2004
Location: Kingman, AZ.
Posts: 448
Default

I used sandpaper, but there are aircraft paint removers out there.

George
Reply With Quote
  #9  
Old 12-17-2007, 06:00 PM
Captainofiron's Avatar
Captainofiron Captainofiron is offline
Chief Ponti-yacker
 
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
Default

Quote:
Originally Posted by lawbreaker2
What is the best way to remove the clear coat of them.
imo a chemical stripper, sand paper can ruin the finish if your not careful, there is no way the chemical can ruin the finish on the aluminum.
__________________
www.fquick.com/Captainofiron

68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
Reply With Quote
  #10  
Old 01-10-2008, 01:29 AM
SteveGB21's Avatar
SteveGB21 SteveGB21 is offline
Chief Ponti-yacker
 
Join Date: Dec 1999
Location: Yuma, AZ U.S.A.
Posts: 553
Send a message via Yahoo to SteveGB21
Default Wheel Size.

Wondering by any chance, what size are the wheels? Have an '02 Firebird, and this tech may help me later, since it has chrome wheels just like those (mine are 16", and minus the WS-6 Center Caps).
Reply With Quote
  #11  
Old 01-10-2008, 01:35 PM
Dens71TA's Avatar
Dens71TA Dens71TA is offline
Ultimate Warrior
 
Join Date: Jul 2002
Location: Midwest
Posts: 2,315
Default

That style wheel was available in 16" and 17"(WS6)
Reply With Quote
  #12  
Old 01-10-2008, 06:23 PM
Captainofiron's Avatar
Captainofiron Captainofiron is offline
Chief Ponti-yacker
 
Join Date: Apr 2007
Location: Austin, TX
Posts: 648
Default

Quote:
Originally Posted by SteveGB21
Wondering by any chance, what size are the wheels? Have an '02 Firebird, and this tech may help me later, since it has chrome wheels just like those (mine are 16", and minus the WS-6 Center Caps).

my wheels are 17 inchers

if you have chrome wheels without clear coat this technique probably will not work
__________________
www.fquick.com/Captainofiron

68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:34 PM.

Featured Vendors


Advertising Info