FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Engine ID
Friend just pulled engine for a rebuild.There is no ID on front of block such as WS or WT. No numbers either. The date code on dist pad reads II47. Just behind passenger side head on block, reads 9792968. Any help appreciated.
|
#2
|
||||
|
||||
A quick Google of the number says...it's a 428. The date would make it a '68 model year.
|
#3
|
|||
|
|||
xxxxxxx
Has 3 freeze plugs, if that helps.
|
#4
|
|||
|
|||
xxxxxxxxxxxxxx
I thought the 428 engines had 428 on the side of the block. THere is nothing on this block.
|
#5
|
||||
|
||||
455s do, not sure about 428 engines.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
#6
|
|||
|
|||
My 428 has 28 in the center of lifter valley and also 428 on LH side of block
1968 YH code |
#7
|
||||
|
||||
Some 428's have 428 in between freeze plugs.
Sent from my Moto Z3 Play using Tapatalk
__________________
You never know what I might have that you are looking for. EMAIL me. Also check out my other ads here on PY. Just click on user name to view other ads. USPS Money Orders or Wal-Mart to Wal-Mart money gram wire transfer -preferred payments. If Payment doesn't show up in 3-4 days, I move on to the next person that wants it. Serious Inquiries Only - Shipping Isn't Free. |
#8
|
|||
|
|||
xxxxxxxxxxx
We have not looked at the lifter valley yet, but nothing on the side of block.
|
#9
|
|||
|
|||
The lack of a Manifest Code stamping and Engine Unit No. might be because it was ground off. Otherwise, it may have been a block used for a Service Replacement motor. If SR, look for a stamping alongside the Timing Chain Cover a few inches below where you would normally find the Manifest Code stamping.
SR blocks would not get a Manifest Code stamped on them. I'm no expert on the '68 cast 428 blocks but I'm guessing since this was a pretty early model year block casting, very possible the additional identifiers cast on the side of the block had not yet begun at the time this block was cast. |
Reply |
Thread Tools | |
Display Modes | |
|
|