 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
06-19-2021, 09:44 PM
|
||||
|
||||
Borg Warner Super T-10
I have for sale a Borg Warner Super T-10, Dated 1981, all aluminum case, 3.42:1 first gear. This is used but in great condition.
Garage is getting to full of extra parts and need to liquidate. Asking 1,200 obo, pick up only. Located in Allentown, PA If you have any questions please feel free to ask, you can PM me or email me at gto6569@yahoo.com Thanks, Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi. 
|
|
#2
06-28-2021, 12:29 PM
|
||||
|
||||
|
I am open to offers. No longer have a need for this tranny and don't want it laying around if someone can use it for their project.
Thanks, Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|
|
#3
07-12-2021, 10:14 AM
|
||||
|
||||
|
Good luck. Seems like T-10's are a hard sale
__________________
1964 GTO 501, Edelbrock Heads NA, 3460 lbs. 9.76 @ 137mph 1971 Trans Am Lucy Blue, 11.56 @ 115 1966 LeMans. 462, SD prepped Kaufman D ports. 11.90 @ 112 1976 Trans Am twin turbo 462, SD Edelbrock heads 8.50@159 2009 G8 GT |
|
#4
07-13-2021, 12:28 PM
|
||||
|
||||
|
Finding that out, even the Muncie I have for sale has gotten no attention. Maybe if I would opt to ship I may reach more people, but don't want to be bothered with packaging it up and added expense to final price.
Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|
|
#5
09-13-2021, 12:36 PM
|
||||
|
||||
|
Still For Sale
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|
|
#6
09-13-2021, 12:55 PM
|
|||
|
|||
|
3.42s are the hardest to sell as it has the lowest TQ rating.I love them for a street car.I have one in my 62 421HO GP with 2.68s in the back.Before this I had one in a 63 421HO GP.I have never broken one with just ordinary street driving.Actually raced the 63 a few times with 3.42s in the back.Granny shifted it,im told its still in the car with no issues.Good luck with the sale.Tom
|
|
#7
09-14-2021, 12:39 PM
|
||||
|
||||
|
Thank you Tom. Really I don't think 4 speeds are the in thing anymore. I bet 20 years ago there would have been people knocking down my door for these 4 speeds, but now nothing.
I am on PY, marketplace, racing junk, word of mouth with friends, poster at car shows and cruise nights and I have gotten no interest at all for the T-10 or the Muncie. I figured someone would want the T-10 for a restoration since the 3:42 is too high for racing. Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|
|
#8
01-25-2022, 01:21 PM
|
||||
|
||||
|
Still for sale!!!
Mark
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|
|
#9
04-19-2022, 12:15 PM
|
||||
|
||||
|
Still for sale
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|
|
#10
09-11-2022, 03:33 PM
|
||||
|
||||
|
SOLD!!!
Thanks PY
__________________
1965 GTO: 467 (Built By Dan Willever), 400 Block, Eagle 4.25 Stroke, Eagle 6.8 Rods, BRC Pistons, Custom Grind Hydraulic Roller Cam, Edelbrock 72cc Heads Ported, HS Rockers, Doug's Headers, Edelbrock Victor 4150, QTF 850 Carb, TCI Flex plate, AutoGear M22 4 Speed, SPEC Clutch and Pressure Plate, 12 Bolt 3:73 Posi.
|
| Thread Tools | |
| Display Modes | |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
