#1  
Old 08-05-2021, 10:22 PM
cnc's Avatar
cnc cnc is offline
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default Hood to fender bumpers

How many are there 4….?? Or 6…???

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
  #2  
Old 08-06-2021, 07:55 AM
Aus78Formula Aus78Formula is offline
Suspended
 
Join Date: Aug 2006
Posts: 1,389
Default

Google Firebird engine bay pic.

6

  #3  
Old 08-06-2021, 10:31 PM
cnc's Avatar
cnc cnc is offline
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default

Got it thanks ..thought I saw some,it's with only 4 ..I've ordered a kit from ames

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
  #4  
Old 08-06-2021, 10:51 PM
Aus78Formula Aus78Formula is offline
Suspended
 
Join Date: Aug 2006
Posts: 1,389
Default

It said my reply was too short! Makes sure they are the solid tapered type, not the triangular hollow type which are Camaro. Although, I'm sure they both work, many wouldn't know they had incorrect on their car. Mine did when I got it, and I replaced them with same again. Or I think even at the time it was the only kit available here, and didn't know any better.

  #5  
Old 08-07-2021, 08:53 PM
fbody_mike's Avatar
fbody_mike fbody_mike is offline
Senior Chief
 
Join Date: Feb 2006
Location: San Gabriel Valley, California
Posts: 489
Default

Yeah Classic Industries had that kit setup with the Camaro triangles too. They corrected the kit shortly after I sent them an email, gosh that was almost 15 years ago now. Oddly they sold the correct rubber separately from the kit at the time.

__________________
I built it one piece at a time and it cost me more than a dime.
  #6  
Old 08-08-2021, 08:51 AM
cnc's Avatar
cnc cnc is offline
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default

The Ames kit appear to be solid

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
  #7  
Old 08-19-2021, 07:30 AM
cnc's Avatar
cnc cnc is offline
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default

Got the Ames kit solid bumpers for the hood kit looks great

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
The Following User Says Thank You to cnc For This Useful Post:
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:28 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017