FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
63 Gr Prix Blower Motor Removal help
Looking for tips & tricks to remove and replace the HVAC blower motor on my 1963 Gr Prix with AC. Its pretty tight in that area by the AC evaporator / heater box.
The 63 service manuals say to remove the RH inner fender wheel well. I really dont want to mess with that. Any suggestions and advice would be greatly appreciated
__________________
Phil '63 Grand Prix / 389 Tri-power |
#2
|
||||
|
||||
(Subscribed)
I was planning to remove the inner fender. K
__________________
'63 LeMans Convertible '63 Grand Prix '65 GTO - original, unrestored, Dad was original owner, 5000 original mile Royal Pontiac factory racer '74 Chevelle - original owner, 9.85 @ 136 mph besthttp://www.superchevy.com/features/s...hevy-chevelle/ My Pontiac Story: http://forums.maxperformanceinc.com/...d.php?t=560524 "Intro from an old Assembly Plant Guy":http://67-72chevytrucks.com/vboard/s...d.php?t=342926 |
#3
|
||||
|
||||
I got a new heater core for my 63 non/ac. The service manual says remove the inner fender to replace, I decided it could wait....
James Q.
__________________
James Quayhagen 1963 Bonneville Safari - Nocturne Blue, 4-speed |
#4
|
|||
|
|||
Years ago when I worked for Pontiac we cut a hole in the inner fender and then patched and under coated the fender.
|
Reply |
|
|