SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference.

          
 
 
Thread Tools Display Modes
  #1  
Old 09-02-2021, 11:23 AM
tekuhn tekuhn is offline
Senior Chief
 
Join Date: Sep 2009
Location: East Texas
Posts: 410
Default Complete Butler Rotating Assembly - For Sale

I have a complete Butler rotating assembly for sale. 453 cu. in. as follows:

Eagle cast crank 4.25" stroke w/ 3" main journals and 2.20" rod journals
Eagle H-beam rods w/ 2.20" journals and 6.8" length - bushed for floating pins
Ross custom flat-top forged pistons w/ .990" floating pins - STD 4.120" bore
Sealed Power/Speed Pro 113M main bearings and 7200CH rod bearings - STD
Total Seal CR0690 file-to-fit rings

All components are new in the original boxes and never installed. This assembly was purchased in 2015 fully balanced by Butler. Pistons are nominal 4.116" for a .004" piston to bore clearance in a 4.120" bore.

I purchased this for an NOS 400 block, but have decided to go a different route. I paid $1,898.00 plus shipping and will take $1,500 plus shipping. Assume shipping will be $100+

Located in East Texas - 75757 ZIP code.

Tom Kuhn
Attached Thumbnails
Click image for larger version

Name:	IMG_6201.jpg
Views:	187
Size:	59.5 KB
ID:	572324   Click image for larger version

Name:	IMG_6203.jpg
Views:	186
Size:	69.5 KB
ID:	572325   Click image for larger version

Name:	IMG_6204.jpg
Views:	159
Size:	63.8 KB
ID:	572326   Click image for larger version

Name:	IMG_6202.jpg
Views:	160
Size:	65.5 KB
ID:	572327   Click image for larger version

Name:	IMG_6205.jpg
Views:	169
Size:	83.2 KB
ID:	572328  


__________________
Hoping to finish a project while I'm still able to push the clutch in....

1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures
  #2  
Old 09-02-2021, 04:31 PM
61-63's Avatar
61-63 61-63 is offline
Ultimate Warrior
 
Join Date: Jun 2001
Location: Sour Lake, Texas
Posts: 2,394
Default

You've got a pm. Disregard my question re where in East Texas you are located I noticed and googled your zip code and see that you are between Jacksonville and Tyler.

  #3  
Old 09-02-2021, 06:42 PM
ponjohn's Avatar
ponjohn ponjohn is offline
Ultimate Warrior
 
Join Date: Mar 2002
Location: Connecticut
Posts: 9,530
Default

LOL - question about Texas - I see people say West Texas and East Texas - what is the delineating highway the defines east and west?

  #4  
Old 09-02-2021, 07:23 PM
tekuhn tekuhn is offline
Senior Chief
 
Join Date: Sep 2009
Location: East Texas
Posts: 410
Default

Well, it’s divided by Central Texas, of course!

__________________
Hoping to finish a project while I'm still able to push the clutch in....

1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures
  #5  
Old 09-02-2021, 07:43 PM
moneypit's Avatar
moneypit moneypit is offline
Senior Chief
 
Join Date: Mar 2003
Location: San Marcos, Texas
Posts: 434
Default

Quote:
Originally Posted by ponjohn View Post
LOL - question about Texas - I see people say West Texas and East Texas - what is the delineating highway the defines east and west?
In my book it's IH35

__________________
37 Pontiac Sedan 455 700r4
94 Firehawk Supercharged 5.7 LT1 6spd.
77 Grand Prix base model, 350 pontiac
97 F250 7.3 turbo diesel
85 CJ7 Laredo
65 Impala SS 396, 4 spd, A/C.
  #6  
Old 09-04-2021, 02:23 PM
JKrull66's Avatar
JKrull66 JKrull66 is offline
Chief Ponti-yacker
 
Join Date: Apr 2004
Location: Midland Tx
Posts: 849
Send a message via AIM to JKrull66
Default

Quote:
Originally Posted by ponjohn View Post
LOL - question about Texas - I see people say West Texas and East Texas - what is the delineating highway the defines east and west?
Its over 660 miles one way 790 miles the other. Generally it gets broken into 4 parts to narrow down. FYI
John

__________________
Beers Bikes Babes and Pontiacs Rule!!!

63 Lemans in the 9's race
66 GTO HT Cruiser
06 Triumph Rocket III TURBO! 2300 CC Bad boy
KTM 525 Dirt Terrorizer
POLARIS 900 RZR
10 GMC SLT Duramax Haul anything anywhere
http://www.facebook.com/profile.php?...app_2392950137
  #7  
Old 09-04-2021, 07:24 PM
ChiefCrazyCanuck ChiefCrazyCanuck is offline
Senior Member
 
Join Date: Nov 2002
Posts: 135
Default

I-20

  #8  
Old 09-04-2021, 09:39 PM
tekuhn tekuhn is offline
Senior Chief
 
Join Date: Sep 2009
Location: East Texas
Posts: 410
Default

I20 doesn’t stretch border to border, but I10 does. It’s about 880 miles east to west from New Mexico to Louisiana.

__________________
Hoping to finish a project while I'm still able to push the clutch in....

1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures
  #9  
Old 09-07-2021, 12:46 PM
Nacs Fab's Avatar
Nacs Fab Nacs Fab is offline
Senior Member
 
Join Date: Mar 2009
Location: Missouri
Posts: 118
Default

What Compression was this built around with what Cc chamber?


Sent from my iPhone using Tapatalk

  #10  
Old 09-07-2021, 01:10 PM
tekuhn tekuhn is offline
Senior Chief
 
Join Date: Sep 2009
Location: East Texas
Posts: 410
Default

They were to supposed to give about 10:1 CR using 87cc Edlebrock heads. The pistons are flat-top with two 2.250" valve pockets that are .285" deep, compression height is 1.295", rods are 6.800" long, stroke is 4.250". If you know your deck height you should be able to calculate how far below the deck the piston tops will be. I just told them I had an NOS 400 block.
Attached Thumbnails
Click image for larger version

Name:	IMG_6207.jpg
Views:	114
Size:	51.1 KB
ID:	572636   Click image for larger version

Name:	IMG_6208.jpg
Views:	90
Size:	58.9 KB
ID:	572637   Click image for larger version

Name:	IMG_6206.jpg
Views:	98
Size:	56.8 KB
ID:	572638  

__________________
Hoping to finish a project while I'm still able to push the clutch in....

1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures
  #11  
Old 09-09-2021, 06:28 PM
tekuhn tekuhn is offline
Senior Chief
 
Join Date: Sep 2009
Location: East Texas
Posts: 410
Default

Reasonable offers always considered .......

__________________
Hoping to finish a project while I'm still able to push the clutch in....

1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures
  #12  
Old 09-10-2021, 02:50 PM
Nacs Fab's Avatar
Nacs Fab Nacs Fab is offline
Senior Member
 
Join Date: Mar 2009
Location: Missouri
Posts: 118
Default

PM inbound


Sent from my iPhone using Tapatalk

  #13  
Old 09-17-2021, 09:57 AM
Nacs Fab's Avatar
Nacs Fab Nacs Fab is offline
Senior Member
 
Join Date: Mar 2009
Location: Missouri
Posts: 118
Default

Thank you Tom!


Sent from my iPhone using Tapatalk

  #14  
Old 09-17-2021, 10:00 AM
tekuhn tekuhn is offline
Senior Chief
 
Join Date: Sep 2009
Location: East Texas
Posts: 410
Default

This item is SOLD. Thank you!

__________________
Hoping to finish a project while I'm still able to push the clutch in....

1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:32 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017