FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Pontiac Business Entities Exchange Sources, Compliments and Grievances in regard to Pontiac parts or services rendered by an individual or business. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Hey follks, just wanted to say hi, and tell you how great the people at Rock and Roll engineering are.
I just received my King street 455. It made 650hp at 6100rpms and 617 ft lbs torque at 4500. Not to bad for a low compression motor. you can see the Dyno results at Pontiacpower1.com |
#2
|
|||
|
|||
Hey follks, just wanted to say hi, and tell you how great the people at Rock and Roll engineering are.
I just received my King street 455. It made 650hp at 6100rpms and 617 ft lbs torque at 4500. Not to bad for a low compression motor. you can see the Dyno results at Pontiacpower1.com |
#3
|
||||
|
||||
...you must be new here! [img]/infopop/emoticons/icon_biggrin.gif[/img]
Welcome! "The mind is a precious thing to taste" Brad Nowell |
#4
|
||||
|
||||
__________________
http://www.stockappearingdrags.com http://www.stockappearingdrags.com Come on get off that lawn chair and drive that car like it was meant to be driven. 69' 400 RAIV Judge Conv... 12.86@107 Factory Stock 69' 400 RAIV Trans AM .....12.48@110 Factory Stock 69' 400 RAIV Judge HT..... 13.07@104 Factory Stock 73' 455 SD Trans AM........13's?? not run yet 66' 455 GTO Convert.........12.20@112 non original 63' 421 SD Catalina...........restored fast as h*ll |
#5
|
||||
|
||||
Good luck, you will need all of the luck you can get!
__________________
Due to the current economic conditions...the light at the end of the tunnel has been turned off. Meet you at the finish line.....don't be late! |
#6
|
||||
|
||||
even 9:1 can ping like JiffyPop.
I wanna get my motor to make that power too, yet am darn sensitive about ping with pump gas. Can you talk about the combo....yet? H.I. Stud "11.00/123MPH/1.50 60foot/29.5"/4.10:1/10"/472 #48/Flat HYD/DualQuad/Wenzler/3250Lbs 12.00/112MPH/1.61 60foot/26"/3.31:1/10"/472 #48/FlatHYD/Q-Jet/Torker/3650Lbs"
__________________
12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct |
#7
|
||||
|
||||
...welcome to the 3.31:1 gear club.
"11.00/123MPH/1.50 60foot/29.5"/4.10:1/10"/472 #48/Flat HYD/DualQuad/Wenzler/3250Lbs 12.00/112MPH/1.61 60foot/26"/3.31:1/10"/472 #48/FlatHYD/Q-Jet/Torker/3650Lbs"
__________________
12.24/111.6MPH/1.76 60'/28"/3.54:1/SP-TH400/469 R96A/236-244-112LC/1050&TorkerI//3850Lbs//15MPG/89oct Sold 2003: 12.00/112MPH/1.61 60'/26"x3.31:1/10"/469 #48/245-255-110LSA/Q-Jet-Torker/3650Lbs//18MPG 94oct Sold 1994: 11.00/123MPH/1.50 60'/29.5"x4.10:1/10"/469 #48/245-255-110LSA/Dual600s-Wenzler/3250Lbs//94oct |
#8
|
|||
|
|||
Please post the time your car runs with the motor.
Odds are your King will run more like a servant. Live & learn Stupidity should be painfull |
#9
|
|||
|
|||
We shall see what happens when I run my car.
If it runs mid 10's then what are U still gonna bash Bruce? Im just curious. |
#10
|
||||
|
||||
http://home.earthlink.net/~rvandegrift/fulper.htm
That is a entertaining story. ------------------------------ I am looking forward to walking to work |
#11
|
|||
|
|||
Untill he goes back to Buicks.
10's???Not a chance.Be sure to let me know when you're runnin'-cause i'll be there. Stupidity should be painfull |
#12
|
||||
|
||||
Gach is back with a new name, Travis. 650 HP and it runs 12's. Must be the air in Rhode Island.
Ron
__________________
Due to the current economic conditions...the light at the end of the tunnel has been turned off. Meet you at the finish line.....don't be late! |
#13
|
||||
|
||||
I'll put my 3900+ lb, 11.25:1 compression, naturally aspirated Discomobile up against that 650+ HP nitrous fed pump gas unknown weight Goat (bet it's lighter than mine) and we'll see who comes out in front at the finish line.
Dyno numbers are nice. Timeslips are WAY better. Bring it to any major Pontiac event in the next 12 months and we'll see. No offense, but nobody likes smack-talkers with dyno numbers. You can't race a dyno or a flowbench.
__________________
Just a blind squirrel looking for a nut. |
#14
|
||||
|
||||
I'll be at Maple Grove, Norwalk, and Atco...possibly other races as well.
__________________
Just a blind squirrel looking for a nut. |
#15
|
||||
|
||||
Nice profile Travis. [img]/infopop/emoticons/icon_confused.gif[/img]
We will match or beat anyone's "Current" catolog price on any Automotive related part. Give us a call. We build and learn from em all, but We "LOVE" Pontiacs!!! http://PontiacDude.cc |
#16
|
||||
|
||||
Travis,
First I would like to say welcome to the board. Secondly I would like congratulate you on your new motor. Sounds like it will really haul. As you can see some people around here don't like Bruce Fulper. I'm am sorry if it seemed like a personal attack on you. Please let us know how she runs when you get her on a race track. For some reason it seems that people just love to hate Bruce. Even people who have never met him or had business dealings with the guy seem to jump on the band wagon. Anyhow I met Bruce several years ago when I lived in California and I was in the Inland Empire GTO Club back when Bruce was president. I almast had him build an engine for me but ended up going with another builder. I have purchased parts from him before though. I personally haven't had any bad experiences with the guy. I have seen some cars running pretty fast with R&R Engineering engines. I also know that Bruce was the first or one of the first to have the new Edlebrock heads CNC machined. It also seems to me that Bruce has a knack for producing some pretty powerful low compression motors. I'd have to say that the guy does have some insight into the Pontiac powerplant [img]/infopop/emoticons/icon_razz.gif[/img] Tim C 65 LeMans, 3700lb. all steel, full interior, D-ports and a flat tappet cam, 11.06@122
__________________
Tim Corcoran |
#17
|
|||
|
|||
Kinda funny. Took me and most others I know 12:1 compression with 474ci to make those numbers...........
But hey, those numbers apparently can be had with a 350 Pontiac, so what's the big deal, right? [img]/infopop/emoticons/icon_rolleyes.gif[/img] Chance favors the prepared mind. |
#18
|
|||
|
|||
Motor was in all likelihood dynoe'd at Westec in Southern California.
Known to be generious with the numbers. Not uncommon though, have one in Houston that is similar in nature. 'Damn right it's a street car'
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE |
#19
|
||||
|
||||
Travis,
A few questions. Not bashing anyone, just curious. 1. How much was the total cost and what was the original estimate? 2. How long did it take? 3. If it was delayed was it your fault or the builders? 4. Has the engine been run in a car yet or just on the dyno? 5. I think this was discussed earlier? It looks as if Ccas removed the posts. 6. I went to PP1 and couldn't find the post you refered to. Can you be more specific? Thx. JLP
__________________
JLP |
#20
|
||||
|
||||
Jack, you may have read the discussion here. http://forums.performanceyears.com/g...5366065941&p=1
__________________
So long, farewell. |
Reply |
|
|