#1  
Old 01-18-2000, 08:56 PM
Admin5 Admin5 is offline
Senior Member
 
Join Date: Jun 1998
Posts: 117
Default

Post a part you would like to see reproduced here! Put 1 part per "response" so we have room to edit the posting with our answer. Also, check to see if the part is already listed before you list it again. If you want to start a topic in the proper "tech" board on reproductions, that is fine.

If you really feel a part is needed by many, test your idea by organizing a 'group buy' in the appropriate 'parts-for sale' forum. PY will be glad to participate by calculating a price and reproducing the part once it has shown a 'reasonable' amount of interest and commitment.


Last edited by Ccass; 07-31-2005 at 12:08 PM.
  #2  
Old 01-18-2000, 09:10 PM
FritzCat FritzCat is offline
Senior Member
 
Join Date: Dec 1999
Posts: 105
Default

I'd like to see a quality repo '64 GTO hood.


response....
It took the hobby 20 years to produce the 1st Pontiac hood (67-69 FB 400). 68-70 GTO is next. I doubt if we will ever see a 1 year only hood.

[This message has been edited by Ccass (edited 01-19-2000).]

  #3  
Old 01-18-2000, 11:34 PM
Ed Neasham Ed Neasham is offline
Senior Member
 
Join Date: Dec 1999
Location: Benton City, WA 99320
Posts: 176
Default

A '66 GTO tail light panel (vertical rear of trunk). Finally found one, used, in decent shape and got it for a steal ($350.00). Doesn't seem to be much harder to make than the rear window to trunk piece that PY caries for $80.00. Generally if the bottom of the rear window rusted out, so did the seam between the tail light panel and the trunk floor.

Response...
This project has been attempted several times. The 67 tailpanel will happen 1st. Then we might see the 66.


[This message has been edited by Ccass (edited 01-19-2000).]

  #4  
Old 01-19-2000, 07:19 AM
Bob Kazian Bob Kazian is offline
Senior Chief
 
Join Date: Dec 1999
Location: Taylors, SC
Posts: 375
Default

'67 GTO Grille Mesh or Grille Screens whatever you want to call them They are anodized and are difficult to polish because of all the crimps and recesses.
C'mon Chris, you can do it !

response...
This project has been looked at several times with no luck. Costs would make this item a $300-500 a pair retail item!


[This message has been edited by Ccass (edited 01-19-2000).]

__________________
Bob Kazian
Taylors, SC
bobgoat67@aol.com
  #5  
Old 01-19-2000, 10:09 AM
Doug Doug is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Abingdon,VA
Posts: 1,229
Default

How many commitments for orders would it take to get a plant to crank out windshields for 1963 Tempests at a decent price? I understand that a new one can run between $500 to $700. There is a possibility that this could be co-ordinated with the 63 Buick Skylark/Olds Cutlass owners through car club connections, etc.

response....
That is a question for OEM Glass. I think production run would have to exceed 1000 to be feasible.

[This message has been edited by Ccass (edited 01-19-2000).]

  #6  
Old 01-19-2000, 11:17 AM
PONTIAC DUDE's Avatar
PONTIAC DUDE PONTIAC DUDE is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: West Central Florida
Posts: 14,756
Default

66 GTO frt fenders?

response;

Probably not going to happen. The 68-69 repro fenders didn't even come close to sales expectations... probably killing it for other GTO fenders.

[This message has been edited by Ccass (edited 01-23-2000).]

  #7  
Old 01-19-2000, 02:26 PM
Guest
 
Posts: n/a
Default

74-76 firebird grilles
74-76 front and rear bumpers (f-body)

  #8  
Old 01-19-2000, 09:33 PM
Todd Todd is offline
Member
 
Join Date: Dec 1999
Location: San Diego, CA USA
Posts: 61
Default

[This message has been edited by Todd (edited 07-18-2000).]

  #9  
Old 01-20-2000, 01:38 AM
vidguy's Avatar
vidguy vidguy is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: Livermore, CA
Posts: 3,822
Default

'67 Stainless rocker panels

Response:
Due out this Spring! Projected price $350/pr.

[This message has been edited by Ccass (edited 01-20-2000).]

__________________
--
James

Work
'67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake."
'75 Formula 400 - Daily Driver -
Running with my Home Built 455 and TH400

Details here:
http://forums.maxperformanceinc.com/...d.php?t=588372
  #10  
Old 01-20-2000, 01:39 AM
vidguy's Avatar
vidguy vidguy is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: Livermore, CA
Posts: 3,822
Default

'66-67 headlight bezels.

response;
This project has been attempted. $30,000 for tooling for LH only! Looks like owners will continued to get theirs rechromed. Buy the RH while you can still get it for reasonable.

[This message has been edited by Ccass (edited 01-20-2000).]

__________________
--
James

Work
'67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake."
'75 Formula 400 - Daily Driver -
Running with my Home Built 455 and TH400

Details here:
http://forums.maxperformanceinc.com/...d.php?t=588372
  #11  
Old 01-20-2000, 06:41 AM
Bill Boyle's Avatar
Bill Boyle Bill Boyle is offline
Senior Member
 
Join Date: Dec 1999
Location: Plantation, Florida
Posts: 149
Default

The formula steering wheel is needed now; should be reproduced in several original colors such as saddle, buckskin, blue, black and red. Black spoke and gold ones too.
Bill Boyle

response:
Black on Black is available now! PY has some Gold and black spoked wheels getting done in Black, Saddle, Blue and Red. That's it for now.



[This message has been edited by Ccass (edited 01-20-2000).]

  #12  
Old 01-20-2000, 10:50 PM
edpete edpete is offline
Junior Member
 
Join Date: Dec 1999
Location: Northwestern,PA
Posts: 3
Default

I agree with Todd,the 73-77 A-bodies are largely ignored. So I'd start with wheel well moldings.

  #13  
Old 01-20-2000, 10:53 PM
edpete edpete is offline
Junior Member
 
Join Date: Dec 1999
Location: Northwestern,PA
Posts: 3
Default

Next I'd like to see Bumber rub strips and interior kits too.

  #14  
Old 01-23-2000, 08:06 PM
Bob Kazian Bob Kazian is offline
Senior Chief
 
Join Date: Dec 1999
Location: Taylors, SC
Posts: 375
Default

'65-'67 "GTO" Lucite that goes behind the Dash Grab Bars.
If the lucite itself is nice, it gets damaged taking it off to swap to a nice chrome bezel.

Response;
Bob, another good one, but used ones seem to keep turning up. Technology to make this is available, as it is same type as the sport wheel center insert and the 'pmd' insert for rally II wheels. But look at the price for those little pieces! $35.00 That would make the grab bar well over the price of an excellent used one... One of the key factors in making a repro... it's gotta be cheaper than what's comparably available.

[This message has been edited by Ccass (edited 01-23-2000).]

__________________
Bob Kazian
Taylors, SC
bobgoat67@aol.com
  #15  
Old 01-30-2000, 01:18 PM
edpete edpete is offline
Junior Member
 
Join Date: Dec 1999
Location: Northwestern,PA
Posts: 3
Default

I would also like to see repro. rubber floor mats(in colors)for all the 73-81 A and F bodies.Maybe even with the "GM" logo...

  #16  
Old 01-30-2000, 02:44 PM
Scott Misus Scott Misus is offline
Suspended
 
Join Date: Dec 1999
Posts: 1,052
Default

Quarter panel skins for '61-'62 and for '63-'64 full size cars.

'63 Catalina belt molding for two doors; all 6 pieces.

'69 Bird fenders/inner wells.

Firewall block off plates for heater delete 61-64 full size cars.

Radio delete plates for '59-'64 full size cars.

Backup light delete kits for '59-'64 full size cars.

That's all.

[This message has been edited by Scott Misus (edited 01-30-2000).]

  #17  
Old 01-30-2000, 06:58 PM
Todd Todd is offline
Member
 
Join Date: Dec 1999
Location: San Diego, CA USA
Posts: 61
Default

[This message has been edited by Todd (edited 07-18-2000).]

  #18  
Old 01-31-2000, 02:21 PM
Haloids Haloids is offline
Junior Member
 
Join Date: Jan 2000
Location: Paradise Valley, Az,USA
Posts: 3
Default

I would like to see 69 gto tail lamps and 66 catalina tail lamp gaskets

response:

Sorry but 69 Tailights will probobly always be a re-chrome orig. situation. 66 Catalina gaskets might be able to get done. We would need originals for a pattern.

[This message has been edited by Ccass (edited 01-31-2000).]

  #19  
Old 01-31-2000, 06:29 PM
455ho 455ho is offline
Senior Member
 
Join Date: Dec 1999
Location: Madison, New Jersey, USA
Posts: 117
Default

Would love to see deluxe door panels for a 1971 Trans Am repro'd. These are impossible to find and when you do everyone wants an arm and a leg for them.

  #20  
Old 01-31-2000, 11:17 PM
Cobrabill Cobrabill is offline
Suspended
 
Join Date: May 2000
Location: The Palomino Ranch in Tucson-where the real horsepower lives.
Posts: 441
Default

The following for B-bodies:Conv.top switches for 65-68.V-crest for 68(rubber one)Battery tray for 68.Conv.top latches for 65-68.

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:45 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017