[irgoatmike]

I'd have killed for rust free quarters, wavy or not. Irgoatmike

[67cruiser]

Anyone hear anything on the 67 Quarters as of yet???

[ERIC AULL]

I have not....when C Cass reads this thread, maybe he can post the latest on Dynacorns progress.....that way there won't be so much guessing... Eric

[Alvin]

They won’t be available until complete replacement bodies are made…

[birdsandgoats]

They are now on the Golden Leaf web site with a price and part number so it wont be long. This is the Canadian Dynacorn web site. http://www.goldenleafautomotive.com/...&p=11&pp_num=8

[Nicks67GTO]

$650 a side???!!!! OUCH!!! I suppose the supply of rust free junkyard 67' GTO/Lemans/Tempest 1/4 panels are all used up aren't they? This makes me feel very fortunate to have a California car. If its a top notch re-pop piece I suppose its probably worth it.

How much does a rust free and straight NOS or OEM 1/4 from a GTO, Lemans or Tempest go for anyhow?

[540goat]

They were on a few other sites in the past with prices and they never came out. You would have to be crazy to hold up a project to wait for something that most likely will never be made. I waited 1 year and then bought the skins and they look perfect.

[Old Goat 67]

Originally Posted by Nicks67GTO

$650 a side???!!!! OUCH!!! I suppose the supply of rust free junkyard 67' GTO/Lemans/Tempest 1/4 panels are all used up aren't they? This makes me feel very fortunate to have a California car. If its a top notch re-pop piece I suppose its probably worth it.

How much does a rust free and straight NOS or OEM 1/4 from a GTO, Lemans or Tempest go for anyhow?

$1100 to $2500 a side, IF you can find them.

Waited four years and used original metal patches. Highly frustrating.

Charles

[Alvin]

Originally Posted by birdsandgoats

They are now on the Golden Leaf web site with a price and part number so it wont be long. This is the Canadian Dynacorn web site. http://www.goldenleafautomotive.com/...&p=11&pp_num=8

Originally Posted by Nicks67GTO

$650 a side???!!!! OUCH!!! I suppose the supply of rust free junkyard 67' GTO/Lemans/Tempest 1/4 panels are all used up aren't they? This makes me feel very fortunate to have a California car. If its a top notch re-pop piece I suppose its probably worth it.

How much does a rust free and straight NOS or OEM 1/4 from a GTO, Lemans or Tempest go for anyhow?

Originally Posted by Old Goat 67

$1100 to $2500 a side, IF you can find them.

Waited four years and used original metal patches. Highly frustrating.

Charles

Re: Old Goat 67 - Exactly!

IMO: $650 per side is still MUCH less than the cost of materials and labor to patch existing rusty 1967 GTO panels.

I would suspect that the “no image” shown “1967” 1/4s on goldleaf are really 1966’s.

Has anyone here actually seen these and/or know of anyone who has purchased and installed them?

[ERIC AULL]

They have been in catalogs before....I wouldn't (and did not) hold my breath. A Lot of work goes into a proper lower 1/4 patch.....$650 for an EXCELLENT reproduction, is fair price from where I,m sitting. Eric

[540goat]

Like I said before. I used the skins and they came out perfect, the car is all painted so even if they did make them I wouldn't buy them.

[birdsandgoats]

This is what was sent when I emailed about the quarters yesterday.

Hi Stephen:



This 67 GTO quarter is not available in the market yet.

We don't expect to have this come in at least til mid 2012



GLA

[Nicks67GTO]

Originally Posted by Old Goat 67

$1100 to $2500 a side, IF you can find them.

Waited four years and used original metal patches. Highly frustrating.

Charles

AAAAHHHHHHHHHHHHHHHHHHHH WTF?? $2500/side for good 1/4's??!! Oh man that's tough. That right there would deter me from ever restoring a 67' GTO that needed them....

[67cruiser]

Lets all keep pushing for these quarters and maybe our prayers will be answered. Can,t believe they are not on the market yet.