FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
1/2-20 lug nuts
I just purchased some 17" PY rally 2's, I'd like to use the red capped lugs, there are a set you have to use with these rims based on the taper. The issue I have is the Wilwood brakes I have up front have a 1/2-20 thread. There is apparently no offering of these lugs in that size. I spoke to Wilwood about the lugs, they do not offer a 7/16 hub. I called Ames as they have the same rim for a big car, and they have 1/2-20 red lugs, but they could not say if they would work with these rims. Any one find some that have worked?
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#2
|
||||
|
||||
can you change out the studs?
__________________
67 Firebird Convertible |
#3
|
||||
|
||||
|
#4
|
||||
|
||||
Studs
I contacted their tech line, there are no 7/16 studs available for their hubs
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#5
|
||||
|
||||
YearOne makes a 1/2”-20 stock style lug for the Rally II. I accidentally bought a set for my car. Red ones are available on their site: https://www.yearone.com/Product/1964-72-gto/126bas
If you’d be willing to put up with black ones, I’m happy to send the set I have your way so you can try them out.
__________________
Ken '68 GTO - Ram Air II 464 - 236/242 roller - 9.5” TSP converter - 3.55 posi (build thread | walk around) '95 Comp T/A #6 M6 - bone stock (pics) |
#6
|
||||
|
||||
Sure, that would be great! PM me
Thanks
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
#7
|
||||
|
||||
nuts
Quote:
Ken, thanks for the link!!! I apparently didn't look hard enough at the PY site. I think these nuts will look slick with the red fender liners I'm putting in I'm going to buy them!
__________________
https://www.facebook.com/KauffmanRac...6873234225938/ KRE 461,310 CFM 85cc, KB pistons, Eagle rods, Ohio crank KRE custom HR236,Dougs ceramic,Edelbrock Pro Flo 4. Quick Performance 9". 552HP 594 TQ |
Reply |
|
|