FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Members Helping Members help Buying a non Pontiac item, transportation help, Handy-man advice, directions, vacation ideas, places to dine, ebay and generally anything you think might help other members. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
65 Corvette....electrical
Helping a friend with his Corvette...The car is not fully assembled. We installed his rebuilt windshield wiper motor and with a test light it shows power at the ground strap on the wiper motor. Obviously this can't be correct. Where do we start looking for the problem.
|
#2
|
|||
|
|||
Well I would start checking all of your grounds. Clip a jumper wire to ground and the strap your wiper motor will work. You say not fully assembled that most likely your problem.
__________________
'68 GTO '69 Corvette '75 Cadillac Coupe Deville TOM |
#3
|
|||
|
|||
The motor is controlled through the ground. In other words, it grounds through the switch.
Is there a problem you are trying to correct or just checking before lighting it up? Perhaps this will help....... http://repairs.willcoxcorvette.com/w...tor-wiring.pdf Tim Last edited by NAPA68; 04-25-2021 at 08:45 AM. Reason: Add link |
The Following User Says Thank You to NAPA68 For This Useful Post: | ||
#4
|
|||
|
|||
NAPA68....thanks for that info...I will pass it along.
|
Reply |
|
|