FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
7/16” Screw-In Rocker Studs, Lock Nuts & Guide Plates
Used set of Pioneer or Elgin brand aftermarket 7/16” screw-in rocker studs with locking crimp nuts and good used OEM Pontiac 5/16” guide plates. The studs have 7/16-14 UNC bottom and 7/16-20 UNF top threads. Nothing is damaged and all the threads are good, everything just needs a good cleaning.
These are a nice inexpensive bolt-on upgrade over the failure-prone factory bottle neck screw-in studs. The locking crimp nuts give you an adjustable valvetrain, which is better than the non-adjustable Pontiac factory setup especially when using an aftermarket cam. Located in Canyon Country CA 91387 $40 shipping included in the USA. PayPal (using friends and family), money orders and personal checks accepted. Please send me a PM if you’re interested, thanks |
#2
|
||||
|
||||
Hey Bart, I will take these!!! Got any more???
I'm looking at the other stuff you have, to see if there's anything else I can't live without!!!
__________________
1977 Black Trans Am 180 HP Auto, essentially base model T/A. I'm the original owner, purchased May 7, 1977. Shut it off Shut it off Buddy, I just shut your Prius down... |
#3
|
||||
|
||||
Quote:
That’s about it for 7/16” screw-in studs, I don’t have any more that I know of. Jeff, send me a pm if you see anything else I have here in the classifieds you need. Also let me know what you might be looking for that I’m not listing here. |
The Following User Says Thank You to b-man For This Useful Post: | ||
|
|