FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
IA1 Iron Block 4.380 bore, 50mm tunnel + Comp Roller Cam
I have an IA1 block that I’ve decided I’m going to pass on to someone who will use it. We’ve had a change of heart in my build and my current engine in the machine shop is what I’m going to go with and keep power levels below 800.
This block is O-Ringed and has Dry Deck plugs installed. It’s been filled to about mid way up on the freeze plugs. It has 50mm cam tunnel and standard lifter bores. It should clean up nicely at 4.380” bore. It has had all of the porosity issues taken care of that the IA1 was known for by brazing and machining in the main webbing areas. See pictures. Very nice block priced to sell. Located in Mid Missouri and unfortunately I’m not willing to drive outside Missouri due to me driving to Wisconsin to pick this up. $2500 Firm I also have a use 50mm hyd roller that I will sell that has 4/7 swap in perfect shape. I’ll post pics of the cam card. I paid $200 and that’s what I want for it Sent from my iPhone using Tapatalk Last edited by Nacs Fab; 02-22-2024 at 11:22 PM. |
#2
|
||||
|
||||
50mm Comp Hydraulic Roller gently used. 4/7 swap. I paid $200 and that’s what I’m asking. See cam card photos. I’ll throw in the $50 worth of blue shop towels pictured. Also located in Central Missouri 65202. I can ship the cam on your dime insured.
|
#3
|
||||
|
||||
Block sold. Camshaft still available and I can ship it on your dime.
Sent from my iPhone using Tapatalk |
#4
|
|||
|
|||
Pm sent
__________________
Be carefull of the feet you step on today.They may be attached to the a$$ you kiss tomorrow. |
#5
|
||||
|
||||
Both parts are sold thank you PY
Sent from my iPhone using Tapatalk |
|
|