[supersport#69]

I’m having trouble removing wiper knob bezel and cig lighter container insert.

What’s the trick?

[Half-Inch Stud]

uput you hand behind the dash to the switch, and rotate that back-n-forth, while using a small screwdriver to keep the slotted ferrule.

Make a slotted ferrule tool from a 3/8 (or so) steel line.

[supersport#69]

I ended up figuring it out.

My knob kit came with a lighter bezel. However the bezel doesn’t make sense though unless the lighter container is wrong in there. I don’t see how I’d use it.

[OG68]

68 A & B models used a soft aluminum ferrule around the lighter. Not reproduced and comes up occasionally on ebay.
The "LIGHTER" bezel included in the kits are for 69-72 A bodies

[supersport#69]

Oh ok. So my lighter is correct then.

[Half-Inch Stud]

Aluminum ring was a "theory" to spread the Heat better.
....yet we all use the "Lighter" bezel, and toss the plain aluminum bezel. A matter of taste you know.

[supersport#69]

I actually didn’t even notice a difference until I realized I didn’t know how to use that bezel in the kit.

[6869GTO]

Pretty sure the lighter bezel thing has been covered before and it is determined by which lighter you have, rochester or casco.