FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
68-72 Safe-T-Track with 2.93 or 3.08
Looking for a complete posi rear diff, bolt-in preferred. I’m in Central CA so could pick it up just about anywhere in California. We could discuss shipping options too. Thanks, Will
|
#2
|
|||
|
|||
Still looking
|
#3
|
|||
|
|||
Where are you located?
|
#4
|
|||
|
|||
I’m located in Central California.
|
#5
|
||||
|
||||
Auburn does make a new posi diff for that series if you have a clean good open 2.93 3.08 3.23 ...
__________________
63 Catalina coupe 455 budget drag car 11's 1/4 , 7.4 1/8th 66 Star Chief Executive 57k mile 69 Le Mans 2 dr HT 350 85k mile 15 sec 1/4 69 Firebird 400 Burgandy/Black 70 Olds Rallye 350 F85 4 speed 3.91's 70 Olds Cutlass Cruiser Red Wagon 350 101k miles 15 sec 1/4 12 sec w 455 74 Cheyenne Super C10 LWB Gen 6 454 w ZZ502 cam 3.07gear 13.1 1/4, 8.3 1/8 2020 RAM 1500 SLT 4x4 5.7 A8 Hemi 2007 Hummer H3 3.7 liter turd 2019 Chevy Spark petrol car 38 mpg |
#6
|
|||
|
|||
Still looking. Also would consider 2.93, 3.08 or 3.23 non-posi complete differential.
|
#7
|
||||
|
||||
I’ve got a complete 8.5 open 2.93 gears in KS
|
#8
|
||||
|
||||
I have a 1971 3.08 posi (code BE) from a GP with a 4-pin posi. Same rear for an A-body except it has a 4-pin posi rather than a 2-pin. I'm in NH so shipping would be expensive.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
#9
|
|||
|
|||
That sounds nice AG, unfortunately completely on the other side of the country from you. Gives me hope there may be one closer.
|
#10
|
|||
|
|||
Thanks for the reply 63 Longtop, will keep it in mind but just checked summit and a posi unit for this is close to $700.
|
#11
|
|||
|
|||
It's a shame you're on the opposite side of the country. I have a couple of 2.93 heavy duty limited slip axles out of 1969 and 1970 Grand Prixs. I like finding limited slips in GPs because I am pretty sure every one I've seen has been a 4-pinion posi. I know the 3.23 limited slips have been 4-pinion, whereas the GTO versions were 2-pinion.
|
#12
|
|||
|
|||
Hey Poncho Mike,
Would you be willing to sell one of those 2.93 ring and pinion and 4 pinion posi assemblies? I’m sure it weighs close to 50 pounds but I can get a pretty good deal on shipping and source a BOP 8.2 housing and axles more local to me. Understandable if you don’t want to cannabalize your set-up. Thanks for responding to the want-ad. I tried sending you a PM but your box is full. |
#13
|
|||
|
|||
I have a complete 2:72 safe-t- track removed from a 1971 LeMans if that does you any good. Location near Reno.
|
#14
|
|||
|
|||
Mr. G, 2.73s are a little too tall but thank you.
|
Reply |
Thread Tools | |
Display Modes | |
|
|