FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Headers
Does any one make headers for a 73 GTO.
Looking to get some @ 1 3/4-1 7/8 D-port. Will F-body headers fit? Thanks for any information. GT. |
#2
|
|||
|
|||
Check Dougs Headers
|
#3
|
||||
|
||||
Dougs headers (pertronix) and even Doug Thorley headers unfortunately do not show any parts for a 73 GTO. I think its their websites though... Iunless I read it wrong, what you are looking for is available through Summit from Doug Thorley, Flowtech, Hedman, Patriot to name a few, no? Were you looking for something unique, like stainless or something special? F body headers wont work.
__________________
. Mark S . Who needs nice and pretty, when you can have mean and nasty? KRE Aluminum headed 463CID 73 LeMans. Used to run 10.6x @ 124.55. 3700lbs . So much for 2020...shootin for 9s in 2021...and in 2022 apparently.....looks like 2023 as well. >>My 73 Build thread |
#4
|
|||
|
|||
Im not saying 73LeMans is wrong, but like I said in your Race section post...The Hedman Hustlers I have are 2nd gen F body, and they fit great. I wouldn't think there would be any difference, besides the flange, between round port(mine) and D port. I even put them up against my buddies Dougs headers(D port) for his 66 GTO, and there wasn't much difference.
|
#5
|
||||
|
||||
Bryan, I don't mind being wrong here, and will defer to your real world experience.
__________________
. Mark S . Who needs nice and pretty, when you can have mean and nasty? KRE Aluminum headed 463CID 73 LeMans. Used to run 10.6x @ 124.55. 3700lbs . So much for 2020...shootin for 9s in 2021...and in 2022 apparently.....looks like 2023 as well. >>My 73 Build thread |
#6
|
|||
|
|||
Theres alway the caveat though, you get what you pay for. Cheap headers probably won't fit the same as a quality set like Dougs.
|
Reply |
Thread Tools | |
Display Modes | |
|
|