FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Hydro cable TV?
I'm thinking about swapping my hydros TV linkage with a cable set up.
Anybody have any input or thoughts? Thank you, Jeff |
#2
|
||||
|
||||
Why?
__________________
My Pontiac is a '57 GMC with its original 347" Pontiac V8 and dual-range Hydra-Matic. |
#3
|
||||
|
||||
Jeff, the geometry has to be correct at the top and on the bottom.
Don't break what isn't broken!!
__________________
The difference between inlaws and outlaws? Outlaws are wanted |
#4
|
|||
|
|||
I was just thinking...... A cable set up might give a more "constant" movement and hold adjustment better.
I'm going to replace all the nylon bushings. My linkage is loose again which makes adjustment impossible. The bushings seem to last about 15,000 miles. I put that much on each year. Steve, where do you get your bushings? I was going to try Depot tommorrow... TV plays a very big part in how the trans acts in all gears. Ever notice how powerful the car feels in first and second without the TV connected? I found this out by mistake one day. |
#5
|
||||
|
||||
I steal my bushings from parts cars!!!
__________________
The difference between inlaws and outlaws? Outlaws are wanted |
#6
|
||||
|
||||
Hey, moderators- this guy appears lost... please show him the door.
__________________
Anybody else on this planet campaign a M/T hemi Pontiac for eleven seasons? ... or has built a record breaking DOHC hemi four cylinder Pontiac? ... or has driven a couple laps of Nuerburgring with Tri-Power Pontiac power?(back in 1967) |
#7
|
||||
|
||||
Don't pick on him....he's Polish!!!
__________________
The difference between inlaws and outlaws? Outlaws are wanted |
#8
|
||||
|
||||
Hey Jeff...
Don't remember what size bushing you need for TV rod .....But perhaps you might try some of the brass/bronze bushing offered for repair of door hinges... There are many differnt sizes and the are easy to work with.. NAPA generally carries them on one of their "display trees"" If they have to look up for a size it's part of the Balkamp product line.. Yep..TV rod adjustment is critical...
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#9
|
|||
|
|||
Steve, you missed it. Somebody posted before Jack who must of had a bad trip at Woodstock. It was the craziest post I ever saw. The moderators removed it.
Thanks for the tip Troy. I'm looking into brass, bronze and even ball bearing like the old eelco set ups. My nylon bushings are shot........ Last edited by PITTSBURGH 64; 11-25-2008 at 11:31 PM. |
#10
|
||||
|
||||
Quote:
What did it say?
__________________
The difference between inlaws and outlaws? Outlaws are wanted |
Reply |
|
|