[65 Lamnas]

Looking for a Performer RPM with no port or flange mods....OK if water crossover is cut off.

[Dragncar]

I have one, 275$ + shipping.
Its in nice shape.

[Dragncar]

My RPM, all holes perfect, no grinding. Was on a engine literally for 3 months, thats it.
A guy at the track got him a 4X 455, put a .540 lift Lunati cam, this intake and a 750 and it ran 12.20 in a 85 Camaro.
I told him to keep the RPM down as the cast rods and heavy pistons would not like it.
So he stacked a rod bearing and he sold the whole thing to me for 350 $ The 455 crank is junk.
So I have a 455 and am selling this but keep an eye out for a real nice 428 crank so build a "440".

[65 Lamnas]

Originally Posted by Dragncar

My RPM, all holes perfect, no grinding. Was on a engine literally for 3 months, thats it.
A guy at the track got him a 4X 455, put a .540 lift Lunati cam, this intake and a 750 and it ran 12.20 in a 85 Camaro.
I told him to keep the RPM down as the cast rods and heavy pistons would not like it.
So he stacked a rod bearing and he sold the whole thing to me for 350 $ The 455 crank is junk.
So I have a 455 and am selling this but keep an eye out for a real nice 428 crank so build a "440".

Perfect. I'll take it. Will get back to you later tonight or tomorrow and we'll figure out payment and shipping details.

Am going to put this up against a ported OEM HO intake on my engine on dyno day....Thanks so much...!!