[ErikW]

Originally Posted by 74SDformula

It may have been cover here but what type of turn around time is expected on these manifolds?

Mine took under two weeks to the door.

[AIR RAM]

Just received an email from Steve, he will be setting up a link to his sight for the GP. He did note that they are going to SEMA... thats bitter sweet... sweet because they are that freaking good and have a great product to show. Bitter for those who want them NOW.... because it will delay the orders for about a week... I guess its sweet as well because it gives everyone a bit more time to gather funds and get the better half's blessing. .

Originally Posted by Steve with Stainless Headers Mfg Email

Morning Nick,

Yes- marketing is on our forefront right now across our entire turbo header product line. We have been very active the last week across facebook, Instagram, and YouTube with a new promo video for the entire line of turbo headers, with plans to follow through to forums and magazines shortly.

Here is a link the video we just finished up for our SEMA display as well if you guys care to see it:

https://www.youtube.com/watch?v=ZnepAUMGfuw&t=4s

Modular Turbo Header Product Line - YouTube
We keep adding to our modular turbo header line. With over 50 different base headers available, coupled with more and more modular components, the system offers infinite turbo header configuration ...
www.youtube.com

I certainly intend to keep pushing through with these Pontiac logs, and other engines with lesser aftermarket options (i.e. Buick and Olds 455s, Ford FE, and others)

As for a GP specific page, that should work just fine. However, I feel we should only have it available to those intending to order within a specific time frame, as it otherwise defeats the purpose of doing the GP at all if we can’t build them simultaneously.

Also, myself and several others from the shop are headed out to SEMA next week, and won’t be in the shop, meaning production will be lowered for most next week. But, I will have everything with me to maintain communications with you and the rest of the forum to help clear up any last minute questions.

As long as nobody is in a rush to get these built and delivered within the next week or so, I should be able to make the page up today or tomorrow, and leave it open until I get back into the office after SEMA (11/11) or so. If that timeline works with everyone, and all 3 remaining sets get ordered within that window (or any window of your choosing), we should only be about a week or so of build time after that.

Keep me posted with everyone’s thoughts! I’ll start on the page this afternoon, and send you the link as soon as we get some consensus on the time frame for ordering.

Thanks again,

Steve Zimmerman
Stainless Headers Mfg., Inc
Phone: 651-448-8661 Fax: 651-448-8675
1135 North 7th Street
Lake City, MN
55041

Originally Posted by RAM AIR-V / ROUND PORT Group Buy List

1) Erik W - (Will be refunded difference)
2) AIR RAM (Nick) (Round Port)
3) Mysticmissle (JEFF) (roundports)
(First Price point) Qty 3: $784.90
4) 455TA (Potential if works with March Serpentine)
5)
(Second Price Point) Qty 5: $764.90
6)
7)
8)
9)
10)
(Third Price Point) Qty 10: $734.95

SPEED SAFE, NICK

[AIR RAM]

More information about availability and time frames...

Originally Posted by Stainless Headers Mfg E-MAIL

Nick,

In case anyone is having any concerns on material availability or extended lead times, here's a couple quick shots of everything ready to go for 4 sets of the Pontiac headers as soon as the orders come in. If we end up having some surprise orders, I will have more flanges available in about 2 weeks. There is enough heavy wall tubing on hand to build about 20 sets of turbo headers, but that covers our Pontiac, Chevy, Ford, and Mopar lines of systems.

Either way, material availability certainly isn’t an issue, and hopefully isn’t holding anyone back from hopping on the list!

Thanks again,

Steve Zimmerman
Stainless Headers Mfg., Inc
Phone: 651-448-8661 Fax: 651-448-8675
1135 North 7th Street
Lake City, MN 55041

www.stainlessheaders.com

SPEED SAFE, NICK

[AIR RAM]

Guys, Steve has provided the link for the GP. I just placed my order... I also added the ceramic coating option.


GROUP PURCHASE LINK BELOW:

CLICK HERE FOR THE DIRECT Group Purchase Link

Once you place your order post up on here so we can keep track... if more people jump in and we hit the next GP discount price, Steve will issue refunds for those who paid at the higher price...

I would also like to point out that ANYONE who wants to participate can use that link while its open... I just ask that you post here if you place an order so we can keep count...

SPEED SAFE, NICK

Originally Posted by RAM AIR-V / ROUND PORT Group Buy List

1) Erik W - (Will be refunded difference) PAID
2) AIR RAM (Nick) (Round Port) PAID
3) Mysticmissle (JEFF) (roundports)
(First Price point) Qty 3: $784.90
4) 455TA (Potential if works with March Serpentine)
5)
(Second Price Point) Qty 5: $764.90
6)
7)
8)
9)
10)
(Third Price Point) Qty 10: $734.95

SPEED SAFE, NICK

[mysticmissle]

Originally Posted by RAM AIR-V / ROUND PORT Group Buy List

1) Erik W - (Will be refunded difference) PAID
2) AIR RAM (Nick) (Round Port) PAID
3) Mysticmissle (JEFF) (roundports) PAID
(First Price point) Qty 3: $784.90
4) 455TA (Potential if works with March Serpentine)
5)
(Second Price Point) Qty 5: $764.90
6)
7)
8)
9)
10)
(Third Price Point) Qty 10: $734.95

looks like the cost has been adjusted a little on these. I was only billed 779.85 good deal getting better

[AIR RAM]

Originally Posted by RAM AIR-V / ROUND PORT Group Buy List

1) Erik W - (Will be refunded difference) PAID
2) AIR RAM (Nick) (Round Port) PAID
3) Mysticmissle (JEFF) (roundports) PAID
(First Price point REACHED) Qty 3: $779.85

4) 455TA (Potential if works with March Serpentine)
5)
(Second Price Point) Qty 5: $764.90

6)
7)
8)
9)
10)
(Third Price Point) Qty 10: $734.95

PONTIAC TURBO HEADERS GROUP PURCHASE LINK BELOW:

CLICK HERE FOR THE DIRECT Group Purchase Link

SPEED SAFE, NICK

[ErikW]

That is awesome! Thank You Steve!

[455TA]

Originally Posted by AIR RAM

PONTIAC TURBO HEADERS GROUP PURCHASE LINK BELOW:

CLICK HERE FOR THE DIRECT Group Purchase Link

SPEED SAFE, NICK

Purchased a set this morning!

[AIR RAM]

Originally Posted by 455TA

Purchased a set this morning!

Updated List

Originally Posted by RAM AIR-V / ROUND PORT Group Buy List

1) Erik W - (Will be refunded difference) PAID
2) AIR RAM (Nick) (Round Port) PAID
3) Mysticmissle (JEFF) (roundports) PAID

(First Price point REACHED) Qty 3: $779.85

4) 455TA - PAID
5)*** ONE MORE ORDER GETS US TO THE NEXT PRICE BREAK!!! ***

(Second Price Point) Qty 5: $764.90

6)
7)
8)
9)
10)

(Third Price Point) Qty 10: $734.95

[mysticmissle]

Any updates? I am not exaclty ready for them, but was wondering if they have been started

[AIR RAM]

Originally Posted by mysticmissle

Any updates? I am not exaclty ready for them, but was wondering if they have been started

Sorry guys, I have been busy both at work and home and just forgot to post his response...

Originally Posted by Steve with Stainless Headers Mfg - Response 11/13/2019

Good morning Nick,

Looks like we hit the first price point for everyone, and orders all came through perfect on my end. I’d like to say a great big thank you to you, Nick for getting this kicked off so well on the forum, and to everyone else who either placed an order, or even just commented and discussed about these turbo headers.

Everything is in stock and production has been started, hoping to have MysticMissile’s and 455TA’s sets out first thing next week, with yours to follow. All will be built simultaneously, but the ceramic coating will add an extra day or so to spray and then cure.

Erik W. should be seeing the refund coming through to him within the next 24 hours!

This definitely went better than I expected, and even though I’m very much a poncho lover, and drive my T/A 6 months a year, I didn’t expect the turbo crowd to be this emphatic.

So, a great big thank you again to everyone, and we will get your headers coming shortly!

If, after any of you receive the headers, anything needs tweaking or adjusting (they shouldn’t after several revisions now), don’t hesitate to call or email me directly, and I will be more than happy to work on whatever is needed.

Otherwise, (in the wise words of Nick) Speed Safe!

My own car is pictured too, just for fun. It has since been lowered 3” up front via drop spindles, and a fresh 400 going in next spring!

Thanks,

Steve Zimmerman
Stainless Headers Mfg., Inc
Phone: 651-448-8661 Fax: 651-448-8675
1135 North 7th Street
Lake City, MN 55041

SPEED SAFE, NICK

[mysticmissle]

Thanks for the update Nick, and again thanks for organizing this. I agree with Steve Zimmerman, this went smoother than i would have thought for a bunch of pontiac guys.

[mysticmissle]

received a shipping update. should see them about thanksgiving.

[AIR RAM]

Originally Posted by mysticmissle

received a shipping update. should see them about thanksgiving.

I opted for the ceramic coatings... so mine should be a few days behind yours... post some pics when you receive them!!!

SPEED SAFE, NICK

[455TA]

I received my manifolds today and they look awesome. Very high quality work. I'm really hoping that they work with my 2nd gen TA.

[AIR RAM]

Originally Posted by 455TA

I received my manifolds today and they look awesome. Very high quality work. I'm really hoping that they work with my 2nd gen TA.

Thats awesome!!! Cant wait to see them installed... I honestly dont see them having fitment issues... Do you know what size turbos you will be running? Dual or single?

SPEED SAFE, NICK

[charlie66]

Originally Posted by 455TA

I received my manifolds today and they look awesome. Very high quality work. I'm really hoping that they work with my 2nd gen TA.

Can you post a picture of them...

[455TA]

Originally Posted by AIR RAM

Thats awesome!!! Cant wait to see them installed... I honestly dont see them having fitment issues... Do you know what size turbos you will be running? Dual or single?

SPEED SAFE, NICK

Currently, my plan is to run a single BW S480 Turbo, with a billet wheel, from Work Turbochargers. I have FiTech efi, and plan to use a MSD boost timing master Ignition Box to retard timing under boost.

[455TA]

Originally Posted by charlie66

Can you post a picture of them...

[charlie66]

Originally Posted by 455TA

Attachment 525458

Thanks. I hope you post some install pics...

Good luck..