FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Industry Stuff new repro's, updates, other info. |
View Poll Results: would you buy 1 or 2 full quartes for a 67 GTO if available | |||
Yes | 86 | 96.63% | |
No | 3 | 3.37% | |
Voters: 89. You may not vote on this poll |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
67 full quarter panels
We have had a lot of calls about the 67 GTO full quarter panels. I called the supplier today again and all they would tell me is they're coming soon. So we would like to do a poll to see how many of you would actually buy them. If we can keep this thread going with the amount of responses we will send it to the manufacturer with hopes they will listen. As I was just told "the squeaky wheel gets the grease"
__________________
Come on Mom, lemme drive!! |
#2
|
||||
|
||||
You may want to reconsider your poll question, as currently your answers will be inconclusive.
I would be in for 2 assuming quality feedback was good and the price was right.
__________________
1967 GTO Tyrol Blue/Blk Cordova 400, TKO-600, 8.2 Posi w/3.55 400 + .020, decked to .005 SD Performance 240+CFM 670 heads RARE HO/RA manifolds RARE 2.5" Exhaust (18" Magnaflows) SD "Stump Puller" HR cam (230/236, 112LSA, 107.5 ICL) PRW stainless 1.52 roller rockers Forged TRW slugs SCAT H-Beam forged rods |
#3
|
||||
|
||||
Why inconclusive? Either you're interested or not, no? We can't get any feedback since they aren't made yet. We're going off a suggestion from a customer to get enough people asking to try to get them to finish this project sooner than later.
__________________
Come on Mom, lemme drive!! |
#4
|
||||
|
||||
I'll take a RH one right now!
Charles Last edited by Old Goat 67; 12-06-2006 at 06:59 PM. |
#5
|
||||
|
||||
I will take a left side IF they produce some this coming year. I won't be waiting years like I have been.
Can anyone at the supplier give an official definition of what precise time frame is defined by"coming soon"? We have seen the beginning of a new century since owners have been requesting this part. |
#6
|
|||
|
|||
66 Quarter Panels
Like everyone else, I need the whole quarter sooner than later! And like everyone else I will pop for the skins rather than wait indefinately for those quarters that have been in the works for years.
So I will take the pair today!!! |
#7
|
||||
|
||||
Count me in for a pair, left and right!
|
#8
|
||||
|
||||
You can have a yes or no, but to what? One or two? Isn't that what you wanted to know also? Yes, one would buy them, and Yes, I would buy two...that was my point.
Nonetheless, thanks for taking the time to do this Stacey! Us 67 owners appreciate it.
__________________
1967 GTO Tyrol Blue/Blk Cordova 400, TKO-600, 8.2 Posi w/3.55 400 + .020, decked to .005 SD Performance 240+CFM 670 heads RARE HO/RA manifolds RARE 2.5" Exhaust (18" Magnaflows) SD "Stump Puller" HR cam (230/236, 112LSA, 107.5 ICL) PRW stainless 1.52 roller rockers Forged TRW slugs SCAT H-Beam forged rods |
#9
|
||||
|
||||
I would buy two, but I am only be waiting til april, if not I will install those piece of **** skins, I want to drive the car!! I have stalled on the car 2 years just waiting for the new full quarters, not going to wait much longer. I wish they would give a definate date, not just say they are coming!!!!
|
#10
|
||||
|
||||
I think Dynacorn is too busy dedicating resources to Camaro bodies.
__________________
Dave http://www.squidsfabshop.com/? (updated January, 2013, Pypes exhaust installation) |
#11
|
||||
|
||||
I'd take two right now, but they need to be the full deal, up and under the decklid. How about a couple of wheel houses for a 67 convertible, too?
__________________
Save yo Confederate money, boys, the South is gonna do it again! Pecosbill |
#12
|
||||
|
||||
I'll take a pair.
|
#13
|
||||
|
||||
Can you send pictures and are they for a GP 67
|
#14
|
||||
|
||||
1977 Pontiac CATALENA two door
Quote:
|
#15
|
|||
|
|||
67 Quarter Panels
I'll take a pair. Although I'm restoring a '66 goat, I'd rather have to add the 66 rear panel to a full quarter panel than deal with the skins. We've been waiting a long time for these, I just hope the fit is right.
|
#16
|
|||
|
|||
6 months ago I would have purchased a left and a right, but I have moved on with patches instead. So you lost the sale of two because of the indefinate delivery on these!
|
#17
|
|||
|
|||
After waiting, I finished patching my originals this past year-look really good. Would still be interested in 2 if/when they become available.
__________________
My money talks to me-it usually says goodbye! |
#18
|
||||
|
||||
this would all depend on the price and quality.
I dont want to cut off the back 12 inches and etc...... Make a good one and they will sell thereself. I would be in provided the above was met. |
#19
|
|||
|
|||
I too have went the patch panel route after waiting for over 3 years. I will say that I would still be interested in a pair in the future, as I don't like the patched up quarters. irgoatmike
|
#20
|
||||
|
||||
Stacey, what is the threshold of interest on the part of Dynacorn? How many units are required to start tooling?
__________________
1967 GTO Tyrol Blue/Blk Cordova 400, TKO-600, 8.2 Posi w/3.55 400 + .020, decked to .005 SD Performance 240+CFM 670 heads RARE HO/RA manifolds RARE 2.5" Exhaust (18" Magnaflows) SD "Stump Puller" HR cam (230/236, 112LSA, 107.5 ICL) PRW stainless 1.52 roller rockers Forged TRW slugs SCAT H-Beam forged rods |
Reply |
|
|