FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Intake gasket material
What may be the best intake gasket material for use with aluminum heads & aluminum intake ?
|
#2
|
|||
|
|||
Blue Felpro or composite etc.?
|
#3
|
|||
|
|||
What ever you have IMO.Tom
|
#4
|
|||
|
|||
Rumor Felpro teflon coat or whatever is on it only for use with cast iron , may that be true ?
|
#5
|
|||
|
|||
Have never been told that.I have built 2 complete alu pontiac engines and used Felpro on both.Tom
|
The Following User Says Thank You to tom s For This Useful Post: | ||
#6
|
||||
|
||||
For easy of service: Blue Felrpo. The phoney Blue felpros were on ebay for $8 ( i forget each/pair?)
I use a high speed 1/2"x 6" belt sander to port-match the openings for best result in cutting through the metal, and getting a clean blue edge. |
The Following User Says Thank You to Half-Inch Stud For This Useful Post: | ||
Reply |
|
|