| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-12-2022, 10:12 PM
|
|||
|
|||
Inner fender wells
How do they come out? Does the entire fender have to come off? Can’t get the passenger side out all bolts are out including the big one at the lower rear fender.
|
|
#2
06-13-2022, 01:07 PM
|
||||
|
||||
|
I ended up removing the outer and inner for a Vintage Air install cause it seemed easier. That being said, the procedure calls for removal of the two bottom, outer fender bolts near door at rocker panel and then pulling on the lower fender to make clearance for the inner fender to come out. FWIW, I didn't try it this way so not sure if it works.
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears '64 LeMans 400/461, #16 Heads, HR 230/236, TKO600, 9inch Rear, 3.89 gears '69 LeMans Vert, 350, #47 heads: Non-running project |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
