FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
darn goat
Hello everyone I’m a new member I have a 67 GTO convertible with a 455 stroker 474 Edelbrock heads 10.5 compression stock intake with quadrojet 331 gears turbo 400 suggestions on any camshafts roller I’m looking at a old faithful on a 114 anybody using one of these thanks also it has ram air exhaust 2.5‘s
|
#2
|
||||
|
||||
That's exactly the cam I would recommend with that engine and exhaust manifolds. I've built multiple engines for customers using the same combination. In most cases I use a Torker II, or Performer RPM, but the stock intake is going to be real close power wise too. Make sure you have an excellent fuel system to supply the Quadrajet though. They only have a fuel bowl versus a Holley's two and need the volume of a good system
__________________
62' Lemans, Nostalgia Super Stock, 541 CI, IA2 block, billet 4.5" crank, Ross, Wide port Edelbrocks, Gustram intake, 2 4150 style BLP carbs, 2.10 Turbo 400, 9" w/4:30 gears, 8.76 @153, 3100lbs |
#3
|
|||
|
|||
Darngoat
Darngoat Thanks Gary H that’s what I wanted to hear
|
#4
|
||||
|
||||
Should have a nice sounding idle and decent vacuum too.
Sent from my iPhone using Tapatalk |
Reply |
|
|