FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Manga flow x pipe
Anyone here have any input on these x pipes or would u suggest another
I'm wanting to upgrade to 3 inch pipes off the headers to the muffler with an x pipe to replace my 2 1/2 inch x pipe set up Thanks Chris
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#2
|
||||
|
||||
I run one. I think I got it from eBay over here. It's a Chinese knock off of a magnaflow from the appearance. Either way it works fine.
__________________
'71 Holden HQ Monaro - 3850lbs race weight, 400c/i - 11.4 @ 120 '66 Pontiac GTO - 389, 4 speed street cruiser |
#3
|
||||
|
||||
There on for sale close for $80 it's stainless but my exhaust is not.....not sure how much of an issue that will be
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#4
|
||||
|
||||
It'll weld fine. If you're worried just put flanges on but I wouldn't bother honestly.
__________________
'71 Holden HQ Monaro - 3850lbs race weight, 400c/i - 11.4 @ 120 '66 Pontiac GTO - 389, 4 speed street cruiser |
#5
|
|||
|
|||
I have the PYPES 3 inch X crossover on mine it fits well.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2 373 gears 3200 Continental Convertor best et 10.679/127.5/1.533 60ft 308 gears best et 10.76/125.64/1.5471 |
#6
|
||||
|
||||
Just wondering how tight it will make the frt system...from the headers to the cross over then to the mufflers as I'm only changing the frt section out...compared to the pypes crossover
Ernie can u snap a pic of your cross over setup so I can see how much diff it is from this....
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#7
|
|||
|
|||
Before I pull the engine this week I will take a picture.
__________________
466 Mike Voycey shortblock, 310cfm SD KRE heads, SD "OF 2.0 cam", torker 2 373 gears 3200 Continental Convertor best et 10.679/127.5/1.533 60ft 308 gears best et 10.76/125.64/1.5471 |
#8
|
||||
|
||||
IIRC the X should be 10" past the cross member.
__________________
Bull Nose Formula-461, 6x-4, Q-jet, HEI, TH400, 8.5 3.08, superslowjunk |
#9
|
||||
|
||||
We run 3 different brands of X-pipes. The BBK on my sons car looks like a knock off design of the Magnaflow in question. My father runs a Dr. Gas, and I have a Pypes setup on another.
The Dr. Gas is the only "X" I'm aware of where they designed it for a specific application based on engine size and power made (ie: the size and shape of the crossover inside the "X") Gets a little spendy though. As far as the other X's go they all pretty much perform and fit about the same. Packaging gets a little tighter so you end up positioning it in the best location for your particular car. The Pypes fit very well on my 70 Formula, tucked up nicely and cannot be seen anywhere along side the car. Pretty happy with that setup. |
#10
|
||||
|
||||
Yes that's why I'm looking for the pypes...
__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's |
#11
|
|||
|
|||
The PYPES is adjustable too- that's my biggest knock on some other brands.
That adjustability will allow it to fit up nicely on the inlet and outlet sides of the X.
__________________
John IG: @crawdaddycustoms YouTube: https://www.youtube.com/channel/UCK9...Nc_lk1Q/videos |
Reply |
|
|