[TN68GTO]

After checking with Ames, Year One, OPGI and local parts I've come up empty on an idle stop solenoid. Anyone have any recommendations to where I can find one?

[68bird400HO]

There are usually repops and originals on Ebay.

[ponyakr]

Inline Tube sells a repop.

https://www.inlinetube.com/_p/prd14/...oid---inl14944

http://www.theautopartsdepot.com/product/5829914/

Here's a bracket for a '68 Q-jet, in case you don't have one,

http://www.ebay.com/itm/68-70-Pontia...-/200772036346

[TN68GTO]

Originally Posted by ponyakr

Inline Tube sells a repop.

https://www.inlinetube.com/_p/prd14/...oid---inl14944

http://www.theautopartsdepot.com/product/5829914/

Here's a bracket for a '68 Q-jet, in case you don't have one,

http://www.ebay.com/itm/68-70-Pontia...-/200772036346

Both of those companies say it's discontinued. I'll keep searching.

[Scott Thelander]

I have watched your posts and was hoping you would find one ...
I know they are are kinda hard to find..

I may have working spare ... I know I have one that does not work , I dont know if they can be repaired or not .... I have a stash box of old q jet stuff in an old edelbrock box under the bench ... I should have an empty table tomorrow after I get a few items ready for shipping tonite to spread the box out and do a bit of organizing...the box is packed full of alll carb and intake stuff..choke pulloffs
fittings original carb bolts and all that intakemisc...

Scott

[DOC]

Have you checked with Cliff Ruggles?

[ponyakr]

If you just need one that is functional, you could find something similar and modify/rig it, to attach to the correct bracket.

But obviously, if you want numbers matching, that won't help at all.

[TN68GTO]

Originally Posted by Scott Thelander

I have watched your posts and was hoping you would find one ...
I know they are are kinda hard to find..

I may have working spare ... I know I have one that does not work , I dont know if they can be repaired or not .... I have a stash box of old q jet stuff in an old edelbrock box under the bench ... I should have an empty table tomorrow after I get a few items ready for shipping tonite to spread the box out and do a bit of organizing...the box is packed full of alll carb and intake stuff..choke pulloffs
fittings original carb bolts and all that intakemisc...

Scott

Scott,

Since you have some spare Qjet parts would you happen to have the gas line fitting for the front of the carb? I was missing mine and had to settle for an aftermarket one. I'd really like to find an original in good shape. Let me know. I'm going to keep looking for my Idle Stop Solenoid, My engine swap has turned into a full frame off resto. I'm sure others can relate to that.

I'll let you know if I find one of the solenoids

[TN68GTO]

Originally Posted by DOC

Have you checked with Cliff Ruggles?

I haven't checked with him yet. I think he's my next step. Thaks for the suggestion.