#1  
Old 04-07-2021, 12:37 AM
lintmann lintmann is offline
Senior Chief
 
Join Date: Nov 2007
Location: Alberta, Canada eh
Posts: 309
Question Throttle Plate ID for a 7040273

Hey Guys I was wondering if someone could help me ID this throttle body assy and the levers. I'm pretty sure it is original to my 7040273 carb but just wanted to be sure.

The casting is 7037174 which I think is correct however it was also used on other quadrajets of the era so that is only a clue. Hopefully it will have some other features that someone could use to confirm it's the correct throttle body assy.

My other question was about the primary throttle shaft/levers. Which one would be correct for this carb? The one that is installed is the one that I believe to be correct. If you look closely at the small levers on the choke side, you will see that it is more pointed that the one that is not installed. Also, the radius of this one where the plates attach in the bore is quite sharp where as the one (green one) that is not installed has an obvious radius. Not that this radius should matter but it might help to ID the correct one.

Any help is appreciated as I'm about to rebuild this carb and want to have it as correct as possible.
Attached Thumbnails
Click image for larger version

Name:	Throttle Plate Assy.jpg
Views:	65
Size:	102.1 KB
ID:	564235   Click image for larger version

Name:	Arms.jpg
Views:	57
Size:	33.8 KB
ID:	564236   Click image for larger version

Name:	Shaft Radius.jpg
Views:	70
Size:	80.8 KB
ID:	564237   Click image for larger version

Name:	Throttle Plate Assy..jpg
Views:	61
Size:	117.7 KB
ID:	564238  

  #2  
Old 04-09-2021, 08:27 AM
scott70's Avatar
scott70 scott70 is offline
Ultimate Warrior
 
Join Date: May 2002
Location: maine
Posts: 1,808
Default

Put this in the street section where Cliff will see it.

__________________
72 lemans,455 e-head, UD 255/263 solid flat,3.73 gears,,,10" 4400 converter,, 6.68 at 101.8 mph,,1.44 60 ft.2007
(cam 271/278 roller)9"CC.4.11gear 6.41 at 106.32 mph 1.42 60 ft.(2009) SOLD,SOLD
1970 GTO 455 4 speed #matching,, 3.31 posi.Stock manifolds. # 64 heads.A factory mint tuquoise ,69' judge stripe car. 8.64 @ 87.3 mph on slippery street tires.Bad 2.25 60ft.Owned since 86'
  #3  
Old 04-11-2021, 12:36 AM
3goats's Avatar
3goats 3goats is offline
Senior Chief
 
Join Date: Apr 2005
Location: Canada
Posts: 486
Default

Need close up of off idle slots. Ram air carbs sit higher in bore otherwise the same

  #4  
Old 04-13-2021, 10:31 PM
lintmann lintmann is offline
Senior Chief
 
Join Date: Nov 2007
Location: Alberta, Canada eh
Posts: 309
Default

Thanks guys, I've moved this to the Street section and added a better pic of the idle slots.

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:22 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 

Cold Case Radiators

Cold Case Radiators is a Max Performance company that produces high end aluminum performance radiators at a price point that won't break the bank. Polished and stamped tanks. 2 rows of 1" tubes. Lifetime Warranty.

GTOG8TA.com

GTOG8TA.com is a Max Performance company that manufacturers parts for the 04-06 GTO, 08-09 G8, and 93-02 Firebird/Trans Am platforms.

Copyright © 2017