| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
12-14-2016, 10:33 AM
|
|||
|
|||
"fresh" 1967 big car 400 long block - YF
Price - $1500
Location - Stroudsburg PA Long story made short - I rebuilt this engine in about 1985. It has been properly started/run, but has less than 5 miles and maybe and hour or so of total run time. It is in my stalled project ('67 GP convertible). All machine work was done by Bontempo Bros shop in Linden, New Jersey. New seals, gaskets, blah blah. The engine is still in the car, and can be run, but will be coming out within a few weeks after the new year. Block - YF 400, 0.30" over bore. TRW pistons & rings. Stock crank cut 0.010/0.010, Clevite 77 main and rod bearings. Stock bolts. Crane -068 cam, Crane lifters & push rods. New timing chain. Heads - #143 big car closed chamber small valve heads, 3 angle valve job, stock valves, stock rocker arms with poly-locks. The early 70s iron manifold and Q-jet in the picture are not included in the above price, but are negotiable. The Black Jack "Alumakote" headers are included if you want them. Left side center tube has been "massaged" to clear the steering box. The TH400 behind it is spoken for, but I have another LT TH400 that I could include if you need one. Please send me a PM AND email me through the forum if you are interested. I do not check the forum every day. Thanks.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#2
01-09-2017, 11:40 AM
|
|||
|
|||
|
Still available.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#3
01-12-2017, 03:45 PM
|
|||
|
|||
|
pm sent.
|
|
#4
01-14-2017, 10:35 AM
|
|||
|
|||
|
Quote:
Email me as well as PM - I don't stop in every day, so it may be a day or two before I response to PMs.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#5
01-31-2017, 04:09 PM
|
|||
|
|||
|
I now have a video of the engine (cold start/run). It's too big to upload here, so PM or email me with an email address to send it to.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#6
02-13-2017, 02:57 PM
|
|||
|
|||
|
I'll be pulling this engine shortly. Prior interested parties have not committed. PM or email for video or other questions.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#7
03-01-2017, 08:44 PM
|
|||
|
|||
|
I've delayed pulling the engine as I have had a few tire kickers come and listen to it run. Lots of "want", but no $$.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#8
03-02-2017, 12:17 PM
|
|||
|
|||
|
Per request, date code is B097. It's an early '67 casting WITHOUT the 00 in the valley.
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#9
04-04-2017, 06:22 PM
|
|||
|
|||
|
Still available - still in the car since I keep getting requests to come listen to it, then no-show. video of start/run on youtube from February: https://youtu.be/bRDQoDMiHME
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
|
#10
05-12-2017, 03:38 PM
|
|||
|
|||
|
SOLD
__________________
Jim K in PA 1967 GP HT 428 1967 GP convert 428 1957 Chieftain 4D HT |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
