[1971WARBIRD]

hi guys.just got a 89 GTA and looking for some parts and wondering where you guys buy them.i can find 67-81 parts all over the place,but no 82 up.

this is a pretty clean car that just needs some touch ups to be a really nice driver.

driver side door sill plate
ash tray lid
plate that covers the computer test site under the driver side of dash
button for the shifter for an auto trans
rear spoiler/airfoil

anyway,just wondering where you find the parts.

thanks for your time.

[1971WARBIRD]

have found everything except the rear spolier in the last couple days.i have found the spolier on line for 400.00,just looking around here so i don't have to pay shipping.

since i have bought this i have found several being parted out within a few miles.2 with complete 350TPI and auto's,one a 89GTA and the other,the C word that is drivable.a 91 with complete ground effects and a 305 t-top.

does anyone know what gear ratio's were standard with the 350 auto?

[Formulabruce]

3rd gen.org for info, theres a guy called HAWKS that has alot of stuff, also a buddy of mine has tons of third gen parts.

HAWKS>> http://www.hawksthirdgenparts.com/

the 350TPI will have a METAL cover on back of tune port top cover, the 305 had plastic.. just a lil tidbit

[1971WARBIRD]

i've found just about everything i need.i'd like to switch it back to the stock chip and intake tube.it only gets about 17 mpg,and if i remember right my 86 set up the same way got about 22-24.i do remember my 88GTA with 305 5 speed got 24+ on the road.

i still need to buff it out a couple more times.the paint was weathered pretty bad,but with a little work i doesn't look to bad.

[Young Pontiac Guy]

I believe the stock rearend for a 350 auto would have been a 3.23.