FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
WTB Second gen Firebird d-port headers.
Looking for a new or nice set of d-port headers for a second gen Firebird. What do you have available?
__________________
Pure Pontiac Power!!! Picture of my actual 69 Judge racing in 1970. Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle. |
#2
|
||||
|
||||
I have a set Doug's ceramic coated D-port headers for second gen Birds in great condition, no rust or dings. With new bolts, gaskets and race collector extensions. These were $800 new and collector extension were $50. $600 shipped OBO
Last edited by Doug Hopkins; 09-27-2021 at 09:06 PM. |
#3
|
||||
|
||||
If you are planning on making bigger power, I have Steve Coombes' old 2-piece flange Hedman Hussler headers. These were on his '70 Trans Am, back when he was still running D-ports. I believe 2" primaries and 3.5" collectors.
I had planned on going more radical with my car, at one time, but now don't think I'll ever have a need for these headers.
__________________
'73 T/A (clone). Low budget stock headed 8.3:1 455, 222/242 116lsa .443/.435 cam. FAST Sportsman EFI, 315rwhp/385rwtq on 87 octane. 13.12 @103.2, 1.91 60'. '67 Firebird [sold], ; 11.27 @ 119.61, 7.167 @ 96.07, with UD 280/280 (108LSA/ 109 ICL)solid cam. [1.537, 7.233 @93.61, 11.46 @ 115.4 w/ old UD 288/296 108 hydraulic cam] Feb '05 HPP, home-ported "16" D-ports, dished pistons (pump gas only), 3.42 gears, 275/60 DR's, 750DP, T2, full exhaust My webpage http://lnlpd.com/home |
Reply |
Thread Tools | |
Display Modes | |
|
|