 |
|
| Pontiac - Boost Turbo, supercharged, Nitrous, EFI & other Power Adders discussed here. |
|
|
Thread Tools | Display Modes |
|
#1
11-28-2021, 05:47 PM
|
||||
|
||||
Another Turbo cam question
I saw this used solid roller cam for sale, ya don't see Pontiac blower/turbo cams out there for sale too often. Proposed for a 469, 290 cfm SM heads, 9.6 compression. Single T6 turbo, log headers. E85 port fuel injection. Mostly street and not afraid of a rough idle
 TH400, 3.23 gears.Comp Cams 300/312 Duration @ 0.050 264 intake 276 Exh lobe Lift .4210 .4210 113 ICL 113 LSA @ 0.050 Intake opens at 19 BTDC Exhaust opens at 71 BBDC If not a good for turbo combo is there an "Old Faithful" type cam for turbos out there? Thanks
__________________
Systems under stress fail catastrophically |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode