FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Stroker bottom end parts
Have a brand new set of ICON IC938-040 pistons with locks and Mahle moly coated rings King rod bearings0.020 under and 6.8" BBC style rods (used). All you need is a 4.25 stroke crank and a block that cleans up bore at 4.165. See pics, Ships from Langley WA. 98260 425-894-9290 C.B. $1150 + freight
|
#2
|
||||
|
||||
This is meant for a 400/461+ stroker?
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears '64 LeMans 400/461, #16 Heads, HR 230/236, TKO600, 9inch Rear, 3.89 gears '69 LeMans Vert, 350, #47 heads: Non-running project |
#3
|
|||
|
|||
Yes, that would be a good application, if you have a block that is not bored more than 0.040 over. You can get cast stroker (4.250) cranks with 3.000 mains for less than $500. I think the math works out to 466 C.I. and the pistons have a 10.60 cc relief to help with static compression. Hope this helps
|
Reply |
|
|