FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Filled 455 short block for sale
This is a little weird guys because I don’t remember every detail.
About 2017 I bought an engine Frank (All Pontiac) was listing for a friend who had passed. I sold the heads to lower the compression and installed 87cc heads. It’s a 455 filled to the soft plugs. Steel 4 bolt straight main caps with arp studs. Lifter valley brace Scat 4.21 forged crank 6.8 Callies Comp Star h-beam rods CP gas ported pistons with a slight dome. Moroso oil pan. Comp solid roller cam .750 lift? Ground at 110? .270@.050? Not exact but close. With 335 cfm (87cc) Edlebrocks this engine made 735hp. It ran 6.40s in a 3400lb car at 3200 feet. I’m keeping the heads for a future blown project so just the short block is for sale. $3500 plus shipping. |
#2
|
||||
|
||||
How much dome? What was compression with the 87cc heads?
|
#3
|
|||
|
|||
Pretty sure it was just over 11:1
|
#4
|
|||
|
|||
I’ve changed my mind on keeping the heads. They’re 335cfm (87cc) Edlebrocks with T&D 1.65 shaft rockers. All this engine needs is an intake and carb.
$7,000. |
#5
|
|||
|
|||
Found the cam card, I was close. It’s 282@.050 I&E, .750 lift, ground 110
|
#6
|
||||
|
||||
What is the bore of the block, and where are you located?
|
#7
|
|||
|
|||
4.19 bore
Just ran across Franks old ad, it’s an Ohio forged 4.25 crank for a total of 468” I’m in South Dakota |
#8
|
||||
|
||||
pm sent
__________________
1972 Pontiac LeMans Thanks to Fuelab Digital Fuel Delivery Quarter-Max Chassis and Racing Components |
#9
|
||||
|
||||
Also interested if still available?
|
Reply |
|
|