[Scarebird]

Selling 1970 YS long block that has been bored out to 0.065 over and fitted with 4" stroke Eagle (?) crank and H beam rods from SD Performance with hypereutectic pistons. Assembled by Xact Machine of Bothell, WA (retired).

85cc KRE heads are untouched other than exhaust manifold holes are helicoiled. Fitted with aluminum valve covers.

Cam is Comp unit from KRE with 218/226 duration (?) with Johnson lifters (quiet) and stock rocker arms with adjustable nuts.

Tomahawk lifter cover, 1971 accessory drive w PS and alternator.

2-1/4" Ram Air III exhaust manifolds.

PRW aluminum water pump.


Edelbrock ProFlo4 Port FI unit fitted and running. Consists of throttle body, intake, fuel rails, ECM, distributor and sensors. This setup controls both fuel and spark.

$6,600 with EFI, $4,400 without plus pallet fee and shipping via customer's choice of shipper. Engine is still in vehicle and running if customer or agent wishes to examine.

Engine runs very well, does not smoke but burns 1/2 quart every 5k miles. Very minor leakage. Currently set up with M22Z which will be sold separately with all manual equipment (flywheel, clutch, etc). I am looking for receipts for crank, cam, etc but may have been lost in move.

[Scarebird]

sale pending.

[Scarebird]

sold locally.