 |
|
| SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
|
Thread Tools | Display Modes |
|
#1
05-05-2023, 06:05 AM
|
||||
|
||||
1966 PONTIAC OHC 6 4BC "SPRINT" ENGINE
1966 9782**, ZE, 4BC-A.T. aka SPRINT.
Another true barn salvage cranks over but will need a complete overhaul. Engine Cranks! The incorrect Carburetor has been removed. Flywheel & Starter used just to crank the engine and are NOT included. $750 Plus Your arranged pick up/shipping. VIRGINIA BEACH, VIRGINIA. Thanks. Click the image for Short Vid link;  66-4BC by J. Hamlin, on Flickr
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. 
|
|
#2
05-19-2023, 05:30 AM
|
||||
|
||||
Fastenal's Blue Lane Freight.
For those who may be interested.
I just sent another OHC engine out via Fastenal's Blue Lane Freight. Both buyers were fairly close to a Fastenal location and it worked great. They made the arrangements and I dropped it off at my local store. This is a great option for anyone interested. Strapped & Wrapped!
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
Last edited by Jeff Hamlin; 07-13-2023 at 06:40 AM. |
|
#3
06-02-2023, 06:23 AM
|
||||
|
||||
FYI
For anyone interested in parts I will be attending Norwalk and can deliver this engine as well as any other PREPAID parts.
Cheers.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#4
07-08-2023, 08:24 PM
|
||||
|
||||
|
Decided to revisit the '66 engine.
Pulling parts out for Norwalk and not sure if I'm going to bring this with me, but figured I would add on some of the missing bits.
While at it I changed the oil just for the hell of it and cranked it over a few times to get the juices flowing   66 4BC ENGINE PT 2 by J. Hamlin, on Flickr
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
Last edited by Jeff Hamlin; 07-13-2023 at 06:39 AM. |
|
#5
07-15-2023, 01:45 PM
|
||||
|
||||
|
ADDITIONAL PARTS CORRECTION/ADDED...
Bell & Fly, were removed as this is an A.T. Engine, so I put a correct Flex plate on.
I left the Pilot Bushing in the crank. If you prefer the M.T. parts that would be an additional cost. Also found a Y pipe, not the best (a little thin on the flanges) but cleaned up nicely with no holes, Threw on a coat of High Temp cast iron coat just for the heck of it. The price remains the same.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#7
07-16-2023, 07:00 AM
|
||||
|
||||
|
Everything is secured on Dollies for ease of moving.
Perfect height to slip under the bench out of the way. Also easy to run if needed.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#8
08-26-2023, 06:45 AM
|
||||
|
||||
|
STILL AVAIL;
Whole or Parts I can assist you with shipping.
 
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#9
08-27-2023, 06:45 PM
|
||||
|
||||
|
1966 4BC "SPRINT" Engine 2.0
Okay, here's where I'm at with this engine.
Just to reconfirm, It was said to be a running engine, and upon inspection, it sure seemed likely. This engine was part of a lot that I bought, said to be used by a friend who ran it competitively for dirt track racing of sorts in an International Scout. It has/had many mods of which I have removed a few. The engine spun freely so that was a plus. It cranked with no hesitation so at that point I decided it try and get it to fire. The oil & filter were changed and the engine was primed, it made 26+ with no problem. I then pulled off the fuel pump block off and installed a good working used pump. It primed with no issue as well. I borrowed a carb from my friend and plumbed it in. found a usable Y pipe. Then changed the plugs, wires, coil, and points and tested them. Spark was strong. I did notice the Vacuum advance is a dual port which is not correct for '66 but will replace with a '66 correct unit. I chose not to hook up my radiator stand so this is a short run video, but she lit off like a champ and sounded strong. All numbers have been confirmed less the head. The plugs removed were/are R44XLS which makes me think this may be a '67 head. I do however have a correct head to include as I do not wish to lift the Cam House to check the head number. The cam sprocket was removed to ID the Cam which is an "E" cam so it is correct. The price will remain the same. But the Carb & Y Pipe as well as the new ignition parts are not part of the sale. All else conveys.  66 4BC PT 4 by J. Hamlin, on Flickr
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#10
11-11-2023, 05:10 PM
|
||||
|
||||
ALL FOGGED UP
Putting this one into storage, it'll be here when you're ready
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#11
12-23-2023, 07:18 PM
|
||||
|
||||
|
SALE PENDING.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#12
01-05-2024, 07:09 AM
|
||||
|
||||
|
Locked and Loaded, Final wrap and strap and away they go...
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#13
01-05-2024, 09:22 AM
|
||||
|
||||
Great job saving another one Jeff!
__________________
Jeff R 60 Jaguar Mark 2, 3.8L Automatic 67 Sprint Firebird 230 OHC-6 4-Speed A/C 78 Catlina Safari, Pontiac 400 powered 77 Astre Formula, 215 Buick V-8 T-5 73 Lemans Safari, 400 4bbl 4-speed 71 Catalina Enforcer, 455 4bbl 06 Mallet Solstice #024 LS2, Now with a Tremec 6060 6-speed! 2012 F-150 Echo Boost (My local Ford Dealer SUX!!!) 2020 Dodge Charger Scat pack (recovered) |
| The Following User Says Thank You to camerjeff For This Useful Post: | ||
|
#14
01-05-2024, 10:57 AM
|
|||
|
|||
|
When you run out,come get some more.
Im glad someone has the time and energy to follow thru.
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
| The Following User Says Thank You to Cammer-6 For This Useful Post: | ||
|
#15
01-06-2024, 07:51 AM
|
||||
|
||||
|
Quote:
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
#16
01-08-2024, 07:55 PM
|
||||
|
||||
|
SOLD, THX.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car.
|
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
