FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
1968 ram air II heads
The heads have been gasket matched to r/a IV and the exhaust looks to be polished. The heads are setup for a stock type cam I checked with my spring tester and they have just about 100lbs seat pressure. I got the heads 6-7 years ago on a 68 400 I bought from a guy putting a LS in his 68 GTO. He was a younger guy who worked at a speed shop that had freshened up the engine for him and he spun a bearing. That’s when he decided to go LS and sold the engine. Looks like heads still have stock valves but some brand of aftermarket springs. $3800.00 could deliver to Norwalk if paid for or shipped but that wouldn’t be cheap. Heads are production heads not service D228 and D238.
|
The Following User Says Thank You to grandam1979 For This Useful Post: | ||
#2
|
||||
|
||||
This post is going to taunt me and might end up convincing me to pay for shipping. GLWS.
__________________
Ken '68 GTO - Ram Air II 464 - 236/242 roller - 9.5” TSP converter - 3.55 posi (build thread | walk around) '95 Comp T/A #6 M6 - bone stock (pics) |
#3
|
|||
|
|||
I had them boxed up so I figured it couldn’t hurt to see.
|
#4
|
|||
|
|||
SOLD thanks
|
|
|