FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
13/16 vs 7/8 64 LeMans center link differences?
Other than the tapered stud size is there a difference in shape? I got a ProForged one the is supposed to be right but it rubs on the oil pan. So I’m wondering if there is more of a curve in the center on one vs the other. I replaced all the front suspension and the tie rods were way to long as well.
|
#2
|
||||
|
||||
Any changes to your pitman arm, idler arm, or motor mounts?
__________________
1966 Pontiac GTO (restoration thread) 1998 BMW 328is (track rat) 2023 Subaru Crosstrek Limited (daily) View my photos: Caught in the Wild |
#3
|
|||
|
|||
Mounts yes, pitman and idler no. I am using the 3/16” spacer under the mounts from Butler and it barely clears
|
#4
|
|||
|
|||
Brodad..........i have the proforged one also, i replaced everything in front except the pitman.......mine is close but does not hit.......so far. Just seems odd so many are having these issues with new center link bars. Mine is a 66
Rich |
#5
|
|||
|
|||
After having a great talk with one of the guys at Ames I found out they have a low mileage GTO there and the clearance on it is very close so maybe it's less of an issue than I think.
|
Reply |
|
|