[Brentco]

Does anyone have any leads or ideas on where I can find Edelbrock 87cc D Port Hyd. Roller Heads in stock or to order without a ton of lead time? (Part No. 61575).

All online sources for these heads I’ve been able to find are backordered with an estimated lead time of at least 5-6 weeks. Nothing on eBay, craigslist, etc.

[HoneyHush]

Try Pitstop. My brother just bought a set of d port e heads from them.

[Brentco]

I forgot to mention I’m in Southern California, if anyone knows of any 87cc D-Ports available in the area.

Thanks HoneyHush, I’ll check out Pitstop.

[Brentco]

PitStop doesn’t have the right e-heads in stock, still looking!

[68hotbird]

try Randy Repp at high-performance injuns

[chuckies76ta]

There is also the KRE d port heads. Very nice heads. Run 2 sets here to date.

[68hotbird]

I have had 2 sets of kre d ports on order for over 10 weeks now and still not ready and I ordered bare caastings with no hardware or port work.

[Brentco]

Yep I would be very happy with the 85cc KRS D Ports too. But they are also about a 3 month wait right now.

[mgarblik]

Butler says they will have lots of them in about 10 days to 2 weeks. But they have a huge number of backorders to fill. Might be worth a call though. Randy Repp has several sets of round port, no D-Port right now.

[Brentco]

Originally Posted by mgarblik

Butler says they will have lots of them in about 10 days to 2 weeks. But they have a huge number of backorders to fill. Might be worth a call though. Randy Repp has several sets of round port, no D-Port right now.

Shoot I just missed the 87cc round ports, Randy Repp only has 72cc now. Thanks for the good tip though.

Right now I’m open to anything with an 87cc chamber. I can make round port, bare heads, or flat tappet work with some adjustments. There’s just nothing out there.

[Brentco]

The e-heads I ordered from Summit in early July now have an estimated ship date of January 2022!!!

I need to find some 87cc e-heads I can get my hands on before 2022!