| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
02-24-2023, 05:11 PM
|
||||
|
||||
Bead sealer.
I can't find my old post of what bought in the past to glue my rear slicks. Any ideas?
__________________
 A new best of 9.135 @ 145.4171 Lemans Sport. 72 Lemans Sport. |
|
#2
02-24-2023, 05:28 PM
|
|||
|
|||
|
If its drag radials Permatex # 1 is what you use. High Tack.
|
|
#3
02-26-2023, 09:20 AM
|
||||
|
||||
|
80062 ?
__________________
A new best of 9.135 @ 145.4171 Lemans Sport. 72 Lemans Sport. |
|
#4
02-26-2023, 09:34 AM
|
||||
|
||||
|
Quote:
|
|
#5
02-26-2023, 09:44 AM
|
||||
|
||||
|
Don't ask me how i know that Belt Dressing spray is the wrong choice.
|
|
#6
02-26-2023, 10:27 AM
|
||||
|
||||
|
Quote:
But I also screwed mine (w the 4 speed naturally aspirated to the rims as well, that 60 ft was so important on that car. My turbo car doesn’t hit the tires as hard so I haven’t run screws just the permeated and it’s been fine
__________________
Happiness is just a turbocharger away! 960 HP @ 11 psi, 9.70 at 146. Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug! selling turbos and turbo related parts since 2005! |
|
#7
02-26-2023, 12:29 PM
|
||||
|
||||
|
That's it 80019. Thanks for the help.
__________________
A new best of 9.135 @ 145.4171 Lemans Sport. 72 Lemans Sport. |
|
#8
02-26-2023, 06:41 PM
|
||||
|
||||
|
Our shop uses this stuff from napa, its what i use on mine. No problems at 1.37 60 fts so far.
https://www.napaonline.com/en/search...aler/201805184
__________________
Illinois Outlaw Gassers 6.27@107 9.97@131 |
| The Following User Says Thank You to Bill Eveland For This Useful Post: | ||
|
#9
02-26-2023, 09:40 PM
|
||||
|
||||
|
I used the Permatex on my radials and had no problems,. Have been down to 1.29 60's hitting the tires with a trans brake, Never moved in 2 years. Just changed them this year and had no problem removing the tires that where glued. lacquer thinner cleans it right of the rims.
|
| The Following User Says Thank You to Mike S For This Useful Post: | ||
|
#10
02-27-2023, 10:30 AM
|
||||
|
||||
|
Are you guy coating the rim all the way around on both sides with the product you use? Just the rim or the tire also? Curious.
Thanks.
__________________
68 Firebird. IA2 block, 505 cu in, E-head, Solid roller 3650 weight. Reid TH400 4:11 gear. 29" slick. Best so far 10.12@133 mph. 1.43 60 ft. 76 Trans am, TKX .81 o/d, 3.73 Moser rearend, 468 with KRE D-ports, Doug headers, 3" Exh. |
|
#11
02-27-2023, 01:45 PM
|
||||
|
||||
|
I have never put anything on the bead of my slicks in over 40years of racing. None of the big 3 that mount tires at the track do either.
|
| The Following User Says Thank You to Ken MacNicol For This Useful Post: | ||
|
#12
02-27-2023, 05:20 PM
|
||||
|
||||
|
I only coat the rim side of the bead, i dont run tubes. And the MT slicks are usually pretty rough in that area. So between dawn dishsoap on the inside and bead sealer trying to slow down any leaks at all and keep the slick from spinning.
__________________
Illinois Outlaw Gassers 6.27@107 9.97@131 |
| The Following User Says Thank You to Bill Eveland For This Useful Post: | ||
|
#13
02-28-2023, 01:03 PM
|
||||
|
||||
|
Quote:
|
| The Following User Says Thank You to Ken MacNicol For This Useful Post: | ||
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
