OHC-6 TECH Over Head Cam projects, questions and advice.

          
Reply
 
Thread Tools Display Modes
  #1  
Old 02-24-2024, 08:03 PM
Cammer-6 Cammer-6 is offline
Ultimate Warrior
 
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
Default grrr last bolt on upper belt cover stripped whats oversize bit for it?

Normally not an issue
but this one is tight and stripped so a #4 wont work.
What works thats over sized?

I think these are called truss head.

__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
  #2  
Old 02-25-2024, 07:56 AM
Jeff Hamlin's Avatar
Jeff Hamlin Jeff Hamlin is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: Beach side of Virginia
Posts: 9,376
Default

If the #3 or #4 can't get it you'll likely need to cut a deep slot across it and tap/chisel it out.

Most times I come across parts engines any of the OE screws are toast.

I have a stash of the Harley screws for replacements, while not exact, there near enough.
Attached Thumbnails
Click image for larger version

Name:	P-4.jpg
Views:	55
Size:	65.3 KB
ID:	629316   Click image for larger version

Name:	BELT COVER SCREWS 1.jpg
Views:	53
Size:	68.3 KB
ID:	629317   Click image for larger version

Name:	BELT COVER SCREWS 2.jpg
Views:	47
Size:	12.3 KB
ID:	629318   Click image for larger version

Name:	BELT COVER SCREWS 7.jpg
Views:	55
Size:	54.1 KB
ID:	629319  

__________________
When I die, I want to go peacefully like my grandfather did, in his sleep.
Not screaming like the passengers in his car.
  #3  
Old 02-25-2024, 11:50 AM
Cammer-6 Cammer-6 is offline
Ultimate Warrior
 
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
Default

Jeff I too have been saving the good old ones.
I dont remember these ever being off b4,
Is this Harley part still available?

__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
The Following User Says Thank You to Cammer-6 For This Useful Post:
  #4  
Old 02-25-2024, 07:57 PM
Jeff Hamlin's Avatar
Jeff Hamlin Jeff Hamlin is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: Beach side of Virginia
Posts: 9,376
Default

Yes, these screws can still be had, mostly sub-dealers and epay.

__________________
When I die, I want to go peacefully like my grandfather did, in his sleep.
Not screaming like the passengers in his car.
  #5  
Old 02-25-2024, 08:40 PM
Cammer-6 Cammer-6 is offline
Ultimate Warrior
 
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
Default

ordered some stainless ones off Amazon that look about like the HD ones

I can send them back if they arent close enough
8 of them was about $10

__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
  #6  
Old 02-27-2024, 11:25 AM
Cammer-6 Cammer-6 is offline
Ultimate Warrior
 
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
Default

head on the ones from Amazon are a tad smaller
will order a few HD ones to compare.

__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
  #7  
Old 02-27-2024, 01:40 PM
Jeff Hamlin's Avatar
Jeff Hamlin Jeff Hamlin is offline
Ultimate Warrior
 
Join Date: Jan 2000
Location: Beach side of Virginia
Posts: 9,376
Default

They are also smaller in Diameter as well.
Attached Thumbnails
Click image for larger version

Name:	BELT COVER SCREWS 6X.jpg
Views:	22
Size:	80.7 KB
ID:	629439   Click image for larger version

Name:	BELT COVER SCREWS 6.jpg
Views:	23
Size:	110.4 KB
ID:	629440  

__________________
When I die, I want to go peacefully like my grandfather did, in his sleep.
Not screaming like the passengers in his car.
  #8  
Old 02-27-2024, 02:42 PM
Cammer-6 Cammer-6 is offline
Ultimate Warrior
 
Join Date: Jan 2004
Location: central Fla
Posts: 8,490
Default

OK will do with these for now then
At least they are SS

__________________
Everything comes and goes
Pleasure moves on too early
And trouble leaves too slow
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:43 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017