[duke455]

I'm regretfully selling my 461. here's the low down,
73 400 block
early 389 SD 4 bolt caps
ARP main studs
properly aligned bored
hard filled 1/2 " below water holes
0 decked
bored and honed with torque plates after hard filled
brass plugs
coated cam bearings
mega brace

4340 ohio forged crank 4.25 stroke

eagle 6.800 rods with ARP2000 rod bolts

icon premium forged pistons

clevite coated rod bearings

clevite main bearings

mahle rings file fit

comp roller cam 245/252 @ .050 112 ls 541/540 lift w/ 1.5 about 600 w/ 1.65

comp solid roller lifters (used) but rebuilt by comp

KRE 340 CFM high ports, 2.25/1.75 valves, roller spring 1.900 inst height.
304 cfm @ 600 lift. have flow sheet

scorpion 1.65 race series roller rocker

jomar stud girdles

victor intake highly ported and modified (done right)

1150 dominator carb built by shaker455

MSD pro billet dist

melling md54 pump

milodon windage tray

milodon oil pan/pick up

aerospace vacuum pump and canister

ATI super dampner

KRE head studs

cometic head gaskets

mezier 42 gph water pump

nice timing cover

rollmaster timing chain

butler crank mandrel

never assemble yet $11500 obo

please call for more info 937-244-5515

[duke455]

ok, $10,000

you couldn't buy all that for that price.

[mysticmissle]

Location?

[duke455]

sorry, springfield oh

[duke455]

to anyone who may have been interested in this , I am holding off on selling for right now.
if things change I will re list and get with the people who were in line first. thanks

[duke455]

Back up for sale. must go. feel free to call for more info
937-244-5515

[Ron Landis]

where was the machine work done?

[duke455]

all the machine work was done by Eddie Flora in springfield oh.
Eddie is one of the best. he's been building engines all his life.
holds a couple NHRA records himself. there are a few other
people on here that can vouch for his work. top notch

[duke455]

really needs to go. had some things come up and family is far
more important right now. killer engine for the price.

[Hillard]

I know Eddie, and he's been doing it a looong time. You can Google his name and see pics of his Anglia gasser he set records with, and he still owns the car. Top notch machinist!!

[mysticmissle]

I have started my other motor if you start to part I may be interested in a few things

[Ron Landis]

Originally Posted by duke455

all the machine work was done by Eddie Flora in springfield oh.
Eddie is one of the best. he's been building engines all his life.
holds a couple NHRA records himself. there are a few other
people on here that can vouch for his work. top notch

I know Eddy...eyeing a '65 Chevelle L-79 car he built way back when. Fastest cars in town in the late sixties had his bullets in them. He was building roller motors when nobody knew what they were. He's about a half hour from me and I still watch his gasser run at Kil-Kare.

[duke455]

once again sorry for an early bump but this has to go. price dropped to $9500 please don't delete. also wanted to add the 1150 dominator was built by shaker455 so you know its top notch.

[duke455]

couple of pics of the engine mocked up. just getting an idea of how it was
going to look

[duke455]

here's a couple of the block

[duke455]

dropping the price to $8500 someones got to jump on this. its a killer deal for that price.
my loss is your gain.

[duke455]

Entertaining separating top end from
the bottom end. Any interest?

[duke455]

$7500.00 that's about half of what
this is worth. I have to sell this for
Family issues. Please , someone
Needs a good engine

[AG]

Just talked to duke455, the heads flow 340 cfm@0.600" lift, not 304 cfm. Intake ports are 2.50" high.

[Dragncar]

The cam looks like a street cam. Is this thing pump gas. What is the static CR ?