#141  
Old 05-21-2013, 09:07 PM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default FloorPans

So I have started getting a little dirty now and lifting the old bitumen sheets on the floor pans inside the car.

Was quite pleased. Small amount of pitting under the pedal area but nothing of concern.

Will start on passenger side later this week.

Whilst inside I noticed an area around the backseat on drivers side that has had some extensive beating from underneath the car. My thoughts are it was done for muffler clearance. The car suffered some beating to the inner guards by Pontiac Engineers for tyre clearance. Is this something they may have done also. If not I will rectify the area and flatten it out prior to painting.

Any thoughts on this one.
Attached Thumbnails
Click image for larger version

Name:	P1030417 (2).jpg
Views:	263
Size:	90.4 KB
ID:	323830   Click image for larger version

Name:	P1030420 (2).jpg
Views:	256
Size:	65.9 KB
ID:	323831   Click image for larger version

Name:	P1030412.jpg
Views:	248
Size:	64.5 KB
ID:	323832   Click image for larger version

Name:	P1030415.jpg
Views:	265
Size:	70.4 KB
ID:	323833  

  #142  
Old 05-21-2013, 09:57 PM
Rocky Rotella's Avatar
Rocky Rotella Rocky Rotella is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Omaha, NE
Posts: 2,686
Default

Looking good, Michael.

Just to point out, it wasn't the Pontiac engineers that hammered the rear wheel wells, it was the Hot Rod magazine authors that did the dirty work.

  #143  
Old 05-22-2013, 12:28 AM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default

Thanks for clearing it up Rocky.

Progress is slow mostly due to the time spent removing parts and taking photos and tagging everything so I know where it all belongs come the time for reassembly.

  #144  
Old 11-12-2013, 04:00 PM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default Progress

Carb arrived from Cliff and very happy with his work. Here are some pics. Progress was slow lately as I have still been gathering parts. Sourced a Heater Box and Blower Motor with cover and some other bits and pieces that I need just chipping away slowly.
Attached Thumbnails
Click image for larger version

Name:	2013-11-01 09.24.45.jpg
Views:	219
Size:	47.2 KB
ID:	342877   Click image for larger version

Name:	2013-11-01 09.25.00.jpg
Views:	223
Size:	67.1 KB
ID:	342878   Click image for larger version

Name:	2013-11-01 09.25.28.jpg
Views:	193
Size:	44.8 KB
ID:	342879   Click image for larger version

Name:	2013-11-01 09.26.36.jpg
Views:	199
Size:	80.8 KB
ID:	342880   Click image for larger version

Name:	2013-11-01 09.28.01.jpg
Views:	195
Size:	65.9 KB
ID:	342881  


The Following User Says Thank You to mscicluna007 For This Useful Post:
  #145  
Old 11-13-2013, 01:16 AM
falcon4's Avatar
falcon4 falcon4 is offline
Senior Member
 
Join Date: Mar 2012
Location: Perth, Western Australia
Posts: 114
Default

Looking good Michael.

__________________




'66 Valiant Regal 225
'72 Lemans Station Wagon T-41, 455
'76 Trans Am 455
'77 Ford F-100 4WD 351
'78 Ford F-100 2WD 302
'79 Firebird Black 301
'79 Z28 350
'79 Trans Am 403 numbers matching
'04 Ford Falcon XR8 5.4 ltr.

and no wife.........Yipppeeeeeee
  #146  
Old 11-13-2013, 03:42 PM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default

Thanks Jon.

  #147  
Old 11-13-2013, 10:43 PM
Baron Von Zeppelin Baron Von Zeppelin is offline
Ultimate Warrior
 
Join Date: Jul 2005
Location: North Carolina
Posts: 8,419
Default

Over a year later and this story still amazes me.
Probably always will.

Some fine justice you are bringing back to the car Michael .

  #148  
Old 11-13-2013, 11:58 PM
OZZIEVILLE 67 2 door's Avatar
OZZIEVILLE 67 2 door OZZIEVILLE 67 2 door is offline
Senior Chief
 
Join Date: May 2006
Location: Australia,byron bay
Posts: 421
Default

top project and good read.thanks

John L.

__________________
  #149  
Old 11-14-2013, 06:54 AM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default

Thanks BVZ. What are thoughts about a 74 Y8 block. Would love a 73 block but am not sure one will ever show up but a 74 block might be closest i can get. Happy to throw this to the shark tank.

  #150  
Old 11-14-2013, 04:09 PM
johnta1's Avatar
johnta1 johnta1 is offline
Ultimate Warrior
 
Join Date: Feb 2001
Location: now sunny Florida!
Posts: 21,237
Default

Maybe try to find a K112 cast date Y8?

According to this chart for early 73 engines it seems that Y8/W8 were the engine codes.
(at bottom of sheet in the footnotes)
It doesn't mention the normal SD codes for 73.



I think initially they were going to use Y8/W8 codes but the EGR fiasco required them to change the manifest codes to show that the engines were updated.
The 'new' SD codes were ZJ/XD as most know now.

Since yours was not 'officially' a 'X' VIN car maybe call it an early release SD engine?


Attached Thumbnails
Click image for larger version

Name:	73-early-engine-codes.jpg
Views:	1258
Size:	104.9 KB
ID:	343144  

__________________
John Wallace - johnta1
Pontiac Power RULES !!!
www.wallaceracing.com

Winner of Top Class at Pontiac Nationals, 2004 Cordova
Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats

KRE's MR-1 - 1st 5 second Pontiac block ever!


"Every man has a right to his own opinion, but no man has a right to be wrong in his facts."

"People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates
  #151  
Old 11-15-2013, 02:00 AM
Baron Von Zeppelin Baron Von Zeppelin is offline
Ultimate Warrior
 
Join Date: Jul 2005
Location: North Carolina
Posts: 8,419
Default

Really don't know what i'd do on the block situation .
Know what i would "want" to do ... but ... money is so expensive

Would guess it had an " XD " block/engine without a VIN

  #152  
Old 11-16-2013, 04:13 PM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default

Yeah it makes it hard Baron. I would like find a pre prodution block but I have not seen one in over 12 months and even if one comes up for sale is it useable. I have learnt about unobtanium from this forum lol. SD parts are up there. Seems to be a few 74 blocks about. I have some standard 455 blocks which I will most likely use unless and maybe one day I will get lucky LOL.

  #153  
Old 01-01-2014, 09:58 AM
johnta1's Avatar
johnta1 johnta1 is offline
Ultimate Warrior
 
Join Date: Feb 2001
Location: now sunny Florida!
Posts: 21,237
Default

Michael, was there an emission decal on your radiator support?

Like this:



Attached Thumbnails
Click image for larger version

Name:	73-sd-emission-decal.jpg
Views:	755
Size:	54.0 KB
ID:	348110  

__________________
John Wallace - johnta1
Pontiac Power RULES !!!
www.wallaceracing.com

Winner of Top Class at Pontiac Nationals, 2004 Cordova
Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats

KRE's MR-1 - 1st 5 second Pontiac block ever!


"Every man has a right to his own opinion, but no man has a right to be wrong in his facts."

"People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates
  #154  
Old 01-01-2014, 04:28 PM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default

No it didn't. Only the Coolant decal part no. 337450. And the Engine Oil Decal on the left hand guard part no. 734791.

Michael

  #155  
Old 01-02-2014, 01:39 AM
falcon4's Avatar
falcon4 falcon4 is offline
Senior Member
 
Join Date: Mar 2012
Location: Perth, Western Australia
Posts: 114
Default

Quote:
Originally Posted by mscicluna007 View Post
Thanks BVZ. What are thoughts about a 74 Y8 block. Would love a 73 block but am not sure one will ever show up but a 74 block might be closest i can get. Happy to throw this to the shark tank.
Oh dear, I bought a 73 block out of Brisbane 4 months ago (XL) 455 with 4 bolt mains. The guy had it listed as a 71 HO. I don't really want to sell it now, as I bought it for the station wagon (so I can rebuild the 360 HP 455 in that one) and have been collecting a ton of new parts for it. Let me confirm the numbers for you though. If it's what you really need, we may just have to sit down and talk about it.





If you still need the A pillars, I'm cutting up the 79 T/A within the next month or so. I'll put it aside for you.

__________________




'66 Valiant Regal 225
'72 Lemans Station Wagon T-41, 455
'76 Trans Am 455
'77 Ford F-100 4WD 351
'78 Ford F-100 2WD 302
'79 Firebird Black 301
'79 Z28 350
'79 Trans Am 403 numbers matching
'04 Ford Falcon XR8 5.4 ltr.

and no wife.........Yipppeeeeeee

Last edited by falcon4; 01-02-2014 at 01:46 AM.
  #156  
Old 01-02-2014, 05:17 AM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default

Hi Jon. Thanks for the offer. Not quite the coding I am after but thanks for the offer.

Michael

The Following User Says Thank You to mscicluna007 For This Useful Post:
  #157  
Old 02-07-2014, 05:42 AM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default Update

It has been a little while but I am always progressing slowly.

My wife had a baby not long after we bought the car. He was born Dec 10th 2012 and we named him Rocco. Funny that he like the car is a 2nd week December build just 40 years apart.
Build Date 12B LOL. We have a second on the way this July. I hope their is no fighting over the car over the years.

I have slowly been disassembling and trying to catalogue all the parts. Nuts and Bolts Included and theirs a lot of them. Guards are off. I am close to seperating the Sub frame and Making up a dolly to move the car around on.

The Rear Quarters are in Nice shape with some small pitting in the lower quarters. I have cleaned them up for now and primed for the time being until I get the car Sand Blasted or Chemically stripped. I haven't really decided on what process is best but I know the sand finds its way in every little place it possibly can and will be a nightmare to remove. Their is some rust in the front windscreen/roof area which was under the moulding and this will need attention but other than that the car is sound. The heater area on the cowl needs some small areas repaired from the RHD Conversion but that is the worst of it really.

I have also sourced an LS2 intake and it is on its way. It will arrive by the end of the month and will compliment the SD Heads and SD Carb. My Top end is complete of the Major components. Most likely use the Reproduction aluminium exhaust manifolds as the cast ones are usually cracked from what I have learnt. When the intake arrives I will post some photos.

Michael
Attached Thumbnails
Click image for larger version

Name:	2013-10-28 16.19.09.jpg
Views:	212
Size:	69.4 KB
ID:	352102   Click image for larger version

Name:	P1030626.jpg
Views:	207
Size:	67.0 KB
ID:	352103   Click image for larger version

Name:	P1030624.jpg
Views:	198
Size:	61.8 KB
ID:	352104   Click image for larger version

Name:	P1030627.jpg
Views:	206
Size:	51.7 KB
ID:	352105  

The Following 2 Users Say Thank You to mscicluna007 For This Useful Post:
  #158  
Old 02-08-2014, 10:35 PM
LeighP's Avatar
LeighP LeighP is offline
Ultimate Warrior
 
Join Date: Mar 2003
Location: Sydney, Australia
Posts: 1,637
Default

Coming along fine, mate. Don't lose that original cowl seal...the repros are a bit different to the original.

__________________
Regards,
Leigh
Pontiacs I’ve owned….
1960 Laurentian 283
1963 Laurentian 283
1976 Trans Am 400
1977 Trans Am 400
1951 Chieftain Flat head 6
1967 Firebird 400 convertible
1967 Firebird 400 coupe
1979 Trans Am 403
1971 Formula 455 (clone)
1969 Firebird 350
1968 Firebird 428 manual.
Sydney, Australia
  #159  
Old 02-09-2014, 03:53 PM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default

Thanks for the advise Leigh. It looks like it can be saved so I will try and remove it delicately.

  #160  
Old 03-05-2014, 04:38 PM
mscicluna007's Avatar
mscicluna007 mscicluna007 is offline
Senior Chief
 
Join Date: Oct 2004
Location: Australia
Posts: 303
Default LS2 Intake

Finally got my hands on an LS2 Intake. Really happy to finally have one.
Its one very Heavy Intake and will go nicely with the SD Heads and Carb that I have for the car.
Its taken a long time to find one so I am more than happy to stop looking LOL.
Attached Thumbnails
Click image for larger version

Name:	2014-03-05 10.35.36.jpg
Views:	164
Size:	82.0 KB
ID:	355652   Click image for larger version

Name:	2014-03-05 16.04.07.jpg
Views:	172
Size:	88.0 KB
ID:	355653   Click image for larger version

Name:	2014-03-05 10.40.31.jpg
Views:	204
Size:	82.1 KB
ID:	355654  

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:35 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017