FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
LIFTER BORE SIZES IN AN ASSEMBLED SHORT BLOCK
So, I was going to bite the bullet and order solid roller lifters for my assembled RAV short block that I had received delivery of to me about last summer. I figured before I do, I should measure the existing lifter bores which had sleeves installed. I purchased and set-up my dial bore gauge and took the following measurements, and my results are in the drawing attached.
I wanted to get a consensus about these numbers because I'm really concerned about the Intake lifter bore for Cylinder number 3. Your Thoughts???? |
|
|