 |
|
| SOLD Pontiacs The cars in here have already been sold. The topics will be kept for a few months for referance. |
|
|
Thread Tools | Display Modes |
|
#1
02-01-2012, 05:34 PM
|
||||
|
||||
74 Grandville
I have decided to sell my grandville! I am at a point in my life that it needs to go unfortunately. It does need some work to be road worthy, as far as motor/trans, Gas tank,Do still have the original gas tank with sump that will go with it. Rear brakes. It has 73-74 Buckets from a grand prix inside, Drivers side is electric, nice carpeting,etc.. Dash has only 1 small chip right by drivers door from hitting knee getting in and out. U can either put a floor shifter in it like I had or go back to the column. It has nice wheels on it, tires are like new in front and pretty decent in back too. I have the original electric bench seat as well. Has a 3" pypes x underneath with dumps and 2 1/2 race pro muffler's and tails.The car is put away at this time, but most know this car well! Any questions don't hesitate to ask...
would like 1500!!
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74  2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's Last edited by grandville455; 02-01-2012 at 06:08 PM. |
|
#3
02-01-2012, 06:27 PM
|
|||
|
|||
|
X2.
__________________
66 Gto 65 Gto |
|
#4
02-01-2012, 06:29 PM
|
|||
|
|||
|
What rearend is in it now?
__________________
66 Gto 65 Gto |
|
#5
02-01-2012, 06:37 PM
|
||||
|
||||
|
Don
It's just the stock Mp series Grandville rear with a 2.93 one legger..
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#6
02-02-2012, 06:12 PM
|
|||
|
|||
|
Complete, or as a roller ? $1500.00 ?
|
|
#7
02-02-2012, 07:26 PM
|
||||
|
||||
|
Quote:
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#8
02-02-2012, 08:52 PM
|
||||
|
||||
|
Wow Darby, I hate to hear you're selling it. You are my hero, running not just a big Pontiac, but a mid-seventies Grand Ville. I mean, seeing daylight under that left front is soooo cool!! Wish I could buy it. I hope you will be posting pics of the car. Good luck with the sale.
-Dave
__________________
2 wrongs don't make a right, 3 lefts do. 4 lefts make a NASCAR race but who cares? ---------------------------------------------------------- 2004 Grand Prix GT daily driver 1974 LeMans GT 455 |
|
#9
02-02-2012, 08:53 PM
|
|||
|
|||
|
Jeez Darby, your breakin my heart here, I was just waiting for the day that you had that big bitch in the 9's.
Hope everything works out the way you want. Just sorry I never got to see it go down the track. Stan |
|
#10
02-02-2012, 09:41 PM
|
||||
|
||||
|
Does it come with the factory light weight bumpers? How about a driveshaft that's actually in one piece? Does the 74 super-duty ram air package go with it?
Darn it Darby......you got me thinking about this.....!
__________________
 1965 LeMans Post Coupe..............I'm not waitin for the undertaker....I'm lookin forward to the uppertaker!..... |
|
#11
02-03-2012, 08:01 AM
|
||||
|
||||
|
Quote:
 The driveshaft is a spare one i had that has had the runout taken out and the 1350 yoke on front and solid 3 r spicers in back! plenty strong yet...Here are some pics, the interior was before with the bench etc, but u can see how nice it is in there! The dash gauges are the ralley one's. There is some more pics of the buckets in here i will have to look for them lost a bunch of those at home when computer had to do a reformat!... The underneath is very clean!! just your typical rust on the lower front quarters in front of door, the backs are covered in rubber
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#12
02-03-2012, 10:50 AM
|
||||
|
||||
|
Another pic of the buckets, the shifter was a Z gate, I had a white ball knob on instead of the black cheap plastic looking one. If you were going to put one back in.
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#13
02-04-2012, 05:58 PM
|
||||
|
||||
|
More pics.... These were taken after i got the scoop put on, the car cleans up pretty good for old laquer paint!.. the hood as a little kink in on the drivers side from it being cracked under by the hinge pount, could be welded up etc so and then hood fixed... The front wheels don't go with unless u want to pay extra, so the fronts are just like the backs that are on it now.
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#14
02-11-2012, 11:21 AM
|
||||
|
||||
|
bump
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#15
02-16-2012, 05:47 PM
|
||||
|
||||
|
bumpsky
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#16
03-06-2012, 06:38 PM
|
||||
|
||||
|
bump
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#17
03-14-2012, 03:07 PM
|
||||
|
||||
|
I would really hate to see this be a demo or parted out, bumping up top
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
#18
03-19-2012, 05:02 AM
|
||||
|
||||
|
Do you still have the 455 that came with the car?
|
|
#19
03-19-2012, 02:08 PM
|
||||
|
||||
|
No sorry, that is gone
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
