Reply
 
Thread Tools Display Modes
  #1  
Old 07-24-2002, 10:01 AM
eskimonj eskimonj is offline
Senior Member
 
Join Date: Nov 2001
Location: NJ, USA
Posts: 138
Default

Should the 'PONTIAC' letters on the gas door be painted black or white? I have seen both.

  #2  
Old 07-24-2002, 10:01 AM
eskimonj eskimonj is offline
Senior Member
 
Join Date: Nov 2001
Location: NJ, USA
Posts: 138
Default

Should the 'PONTIAC' letters on the gas door be painted black or white? I have seen both.

  #3  
Old 07-24-2002, 10:13 AM
HALFWAY's Avatar
HALFWAY HALFWAY is offline
Ultimate Warrior
 
Join Date: Jan 2002
Location: Port Charlotte Florida
Posts: 1,009
Default

Mine are painted white.

__________________
I don't always cross thread the bolt - but when I do I run that bitch in with an impact until it's tight!
  #4  
Old 07-24-2002, 01:03 PM
Old Man Taylor's Avatar
Old Man Taylor Old Man Taylor is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Escondido, CA, USA
Posts: 6,945
Default

Mine is also white.

  #5  
Old 07-24-2002, 01:58 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,303
Default

Personally have never seen Black on an original car. Mine are white on both of my 64s. Tom V.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
  #6  
Old 07-24-2002, 02:06 PM
My64GTO My64GTO is offline
Senior Chief
 
Join Date: Oct 2001
Location: MA USA
Posts: 472
Default

White.

I used Testors White enamel with a little (just a spec!) yellow mixed in for coverage. I brushed it on, 2 coats should do it.

Quote:
Originally posted by Tom Vaught:
Personally have never seen Black on an original car. Mine are white on both of my 64s. Tom V.
<font size="2" face="Verdana, Helvetica, sans-serif">

  #7  
Old 07-24-2002, 02:42 PM
eskimonj eskimonj is offline
Senior Member
 
Join Date: Nov 2001
Location: NJ, USA
Posts: 138
Default

Thanks for the info!

The black is just about worn off on mine, so I will take the rest off and repaint white.

Would it be possible for somebody to post or e-mail a close up shot of your gas door? I would like to see an original if possible and how much of the letters are covered by white.

Tom, I know for sure that the black on mine is not original, I just didn't know if it was correct.
Thanks.

[ July 24, 2002, 02:44 PM: Message edited by: EskimoNJ ]

  #8  
Old 07-24-2002, 10:07 PM
My64GTO My64GTO is offline
Senior Chief
 
Join Date: Oct 2001
Location: MA USA
Posts: 472
Default

I have a picture of my tailight section taken when I redid them over the winter. Unfortunately, its not a close up, but if you want me to send it to you, send me a Private Message with your email and I will send it along.

I can tell you I took one of my kids small artist brushes (with plastic bristles) and rode along the inside of the letters with white paint, using the "wall" of the letters as a guide.

I missed a few times and got some paint on the top of the letter. It easily scraped off with an Exacto knife.

Incidentally, I used Testors Dark Red for the inside of the ribs. I didn't find out until after that PY sells the correct color red for the inside of the ribs!
Quote:
Originally posted by EskimoNJ:
Thanks for the info!

The black is just about worn off on mine, so I will take the rest off and repaint white.

Would it be possible for somebody to post or e-mail a close up shot of your gas door? I would like to see an original if possible and how much of the letters are covered by white.

Tom, I know for sure that the black on mine is not original, I just didn't know if it was correct.
Thanks.
<font size="2" face="Verdana, Helvetica, sans-serif">

  #9  
Old 07-24-2002, 11:23 PM
Old Man Taylor's Avatar
Old Man Taylor Old Man Taylor is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Escondido, CA, USA
Posts: 6,945
Default

If you don't have a picture by this weekend, send me e-mail and I will take one and send it to you.

JimTaylor1@cox.net

  #10  
Old 07-25-2002, 12:27 AM
Guy Mazza's Avatar
Guy Mazza Guy Mazza is offline
Chief Ponti-yacker
 
Join Date: Dec 1999
Location: Lancaster ,Calif. USA
Posts: 604
Default

Mine are all white too. Never seen the black on a 64.

  #11  
Old 07-25-2002, 02:20 PM
Old Man Taylor's Avatar
Old Man Taylor Old Man Taylor is offline
Ultimate Warrior
 
Join Date: Dec 1999
Location: Escondido, CA, USA
Posts: 6,945
Default

Here is one on eBay.

http://cgi.ebay.com/ebaymotors/ws/eB...tem=1846485375

  #12  
Old 07-25-2002, 04:03 PM
Ccass's Avatar
Ccass Ccass is offline
Administrator
 
Join Date: Dec 1999
Location: Max Performance Hatfield, Pa
Posts: 4,693
Default

Since we are on the subject.... We no longer have a mold for the 64 Gas door. It was one of our first repro parts and was available on and off since about 1987. Not sure if we would spend the money to start all over again. It's still in everybodies catalog but we're all out. Just a heads up.

__________________
---------------------------
Fool Around, Get Hurt, Don't come Crying to me.
  #13  
Old 07-29-2002, 07:36 PM
Tom Wood 64 Tom Wood 64 is offline
Senior Member
 
Join Date: Apr 2002
Location: Chicago
Posts: 206
Default

The white stays inside the perimiter edges. Just in the valley of the letters.

  #14  
Old 08-25-2002, 11:19 AM
JonnyP JonnyP is offline
Senior Member
 
Join Date: Nov 2000
Location: Fredericksburg, VA
Posts: 140
Default

Sure would like to find the right '64 gas door trim piece for my LeMans..... I believe it's same as on the GTO (but without the red paint between the ribs?). I think the one on mine is off of a Tempest - it looks okay, but it's not right as there is no ribbing and it doesn't match up with the taillight housings. Any leads on where to dig one up would be appreciated - Jon

  #15  
Old 08-25-2002, 05:55 PM
The Champ's Avatar
The Champ The Champ is offline
Ultimate Warrior
 
Join Date: May 2002
Location: Rochester, MN
Posts: 2,538
Default

I have an extra one. It's far from perfect, but if you're interested, send me an email.

Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:00 PM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017