#1  
Old 11-20-2022, 01:57 PM
cnc's Avatar
cnc cnc is online now
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default Dash securing screws

The dash on my 73 Firebird has three nuts used to secure the dash at the glove box end while at the dash bezel gauge pod area there are three " screws " to secure it I think they were a 5/16 head on it but don't know the actual size ....does anyone recall the size of the screws ...thanks

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's

Last edited by cnc; 11-20-2022 at 02:47 PM.
  #2  
Old 11-22-2022, 10:38 AM
78w72 78w72 is online now
Ultimate Warrior
 
Join Date: Nov 2007
Location: iowa
Posts: 4,683
Default

yes, 5/16 head but not sure of the thread size, they are the same thread size/pitch as the screws used for other items in the dash, like the ones holding the gauges, headlight switch etc. but they might be a little shorter length.

i have probably a hundred of these screws if you need some.

  #3  
Old 12-22-2022, 07:28 PM
cnc's Avatar
cnc cnc is online now
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default

I’m sure I can get something here thanks for the heads up dash goes back in this weekend with the harness and cluster installed …gotta keep movin

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:41 AM.

 

About Us

The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.

 




Copyright © 2017