[Baba O'Riley]

One of the inner panel cams on my '71 has stripped-out bolts, so I can't tighten them -- or remove the cam to replace it, unless I cut / drill out the two attaching bolts.

This is the part that's on page 6-35 of the 1971 Fisher Body Service Manual -- the lower-rear arm of the regulator sits in its track and it's used to adjust the up/down level of the top of the glass. Some sources call it an "Inner Sash Channel."

This inner panel cam is about 7-1/4" long and the bolt holes are about 6-3/8" apart at their centers.

I'm not seeing this at any of the usual parts sources. They have them for first-gen but not second-gen.

(1) Does anyone know the part number for this on a '71?

(2) Does anyone know where I can find one?

Thanks as always --